Homemade, cheap, plasma CNC

From the video, the safe height is still lower than probe height.
From the missing green ball thingy, you have not touched off the torch/Z.
Do the buttons 1, 3, 4, 9, 10, work as expected?

Thanks Phil,

Working as per normal.

Knew it was something missing.

Do the buttons 1, 3, 4, 9, 10, work as expected? Yes

RNJFAB wrote:

Thanks Phil,

Working as per normal.

Knew it was something missing.

Glad it is going again.

That was probably my fault, I made a change on 18 Jan and missed that net line. I fixed it a couple of days later but the Buildbot may not have updated for a while so there would have been a window during which any updates would lose that net line.

The intereting thing is that the error you got it not what I would have expected.

Wait, is it working now?
I was still thinking what else could cause such behavior, so can i go to sleep now? 3AM ... eternal.... <<<what song was this from?

thanks Phill and Tommy,
Another problem solved.

I also found a line in the hal file that was out of place, so I fixed it too.



#*******************net plasmac:laser-switch <= qtplasmac.laser_on
#  Tandem AXIS Y2 JOINT 2
#*******************

 

Still up .... 5:12AM
Need sleep .... scratch that, need brain !

tommylight wrote:

Still up .... 5:12AM
Need sleep .... scratch that, need brain !

Haha, if you find a spare one can I have it.

I'll have one too.

ohmic sensoring coming soon. doing it a little differently to most by using a THCAD10 (Not the traditional THCAD5).

Hopefully in a few weeks it will be up and running