4 Axis CNC MIG welding, weavy stuff problem

More
3 years 4 months ago #272645 by Aciera
Replied by Aciera on topic 4 Axis CNC MIG welding, weavy stuff problem

the welds are always in a straight line on one or both planes

Do you mean axes (ie x/y) or actual work planes other than XY?

Please Log in to join the conversation.

More
3 years 4 months ago #272910 by tommylight
Replied by tommylight on topic 4 Axis CNC MIG welding, weavy stuff problem
Added some short videos to second post.
Thank you.

Please Log in to join the conversation.

More
3 years 4 months ago #274155 by rajsekhar
Replied by rajsekhar on topic 4 Axis CNC MIG welding, weavy stuff problem
Just an Idea stuck me.

Two addtional perpendicular axes after C axis may be used using two small motors to create the weave motion only and may be controlled by arduino.

I may be wrong though.

Please Log in to join the conversation.

More
2 years 2 months ago #308482 by rajsekhar
Replied by rajsekhar on topic 4 Axis CNC MIG welding, weavy stuff problem
I am thinking of making a similar machine..

What kinematics is used here?

Please Log in to join the conversation.

Time to create page: 0.218 seconds
Powered by Kunena Forum