Fiatech exhibition - 9 axis ethercat setup

11 months 3 weeks ago #337943 by emresensoy

Fiatech exhibition - 9 axis ethercat setup was created by emresensoy

1 x spindle
8 x ethercat servo motor
1 x pals dir step motor
1 x ethercat 12x digital analog io card
1 x ethercat 32x digital io card
linuxcnc 2.9

Please Log in to join the conversation.

11 months 3 weeks ago #337969 by tommylight

Replied by tommylight on topic Fiatech exhibition - 9 axis ethercat setup

Bedava means free, right?

Please Log in to join the conversation.

11 months 3 weeks ago #337970 by emresensoy

Replied by emresensoy on topic Fiatech exhibition - 9 axis ethercat setup

Of course, it means free

Please Log in to join the conversation.

11 months 3 weeks ago #338003 by rodw

Replied by rodw on topic Fiatech exhibition - 9 axis ethercat setup

very nice, why not ethercat for all 9 motors?
Do you have a link to the ethercat I/O boards?

Please Log in to join the conversation.

11 months 3 weeks ago #338014 by emresensoy

Replied by emresensoy on topic Fiatech exhibition - 9 axis ethercat setup

Please Log in to join the conversation.

Time to create page: 0.079 seconds