CAM232 - 2.5 Axis CAM Software (First 2 Code Free, than 1$ for each)

  We developed a web-based, free G-Code generator for CNC users.

  Features:
  - 13 machining operations (pocket, contour, drilling, slot, counterbore, chamfer and more)
  - Auto cutting parameter suggestion based on material & tool
  - 3D toolpath simulation with interactive viewer
  - Estimated machining time calculation
  - Mobile ready (PWA) - works on your phone
  - 2 free G-Codes per day

  Try it now in your browser: cam232.com/cam.html

  #CNC #CAM #GCode #Manufacturing #Machining #CNCMachining #Industry40 #EgeRobotics #CAM232
 

Had a quick look, seems OK.

emresensoy wrote:

 
  - 2 free G-Codes per day

 

It says 5 gcodes there, and then 1$ for every gcode.

I made discount

While reaching the limit before generating gcode, just had a look at the operation options. Missing essential selection for ucs, and in general a preamble to be set. It seems corner radius is missing for pocket and contour, to have smooth direction change, and desired cornerradius. Stepover as percentage of the cutter diameter is more preferable than fixed value. The contour operations have no rough dimension input? Zig zag facing, is it using stepover? And the drilling operations, eg grid drill have no selection for cycle, retract, clear z (G98)
As i was not able to test for free, this is just from looking at the interface.



 

Thank you for your valuable feedback; I will look into each and every one of it.

all done, thanks

all done, thanks

MaHa wrote:

While reaching the limit before generating gcode, just had a look at the operation options. Missing essential selection for ucs, and in general a preamble to be set. It seems corner radius is missing for pocket and contour, to have smooth direction change, and desired cornerradius. Stepover as percentage of the cutter diameter is more preferable than fixed value. The contour operations have no rough dimension input? Zig zag facing, is it using stepover? And the drilling operations, eg grid drill have no selection for cycle, retract, clear z (G98)
As i was not able to test for free, this is just from looking at the interface.
 

A 1-month free Pro membership will be automatically added to any account upon first login.

If you experience any problems, please write here.