- Posts: 22012
- Thank you received: 4
I CNC'ed my table to move a camera.
- tommylight
-
Topic Author
- Online
- Administrator
-
Less
More
3 months 3 weeks ago #347618
by tommylight
I CNC'ed my table to move a camera. was created by tommylight
My latest brain fart
Please Log in to join the conversation.
3 months 3 weeks ago #347620
by tuxcnc
Replied by tuxcnc on topic I CNC'ed my table to move a camera.
Overkill...
For purposes like this, GRBL is more than enought...
For purposes like this, GRBL is more than enought...
Please Log in to join the conversation.
3 months 3 weeks ago #347649
by rodw
Replied by rodw on topic I CNC'ed my table to move a camera.
Very cool Tommy. Now if you have a compatible video system or switcher, you can use an NDI App on your phone and you can go wireless on your network. I've been using NDI with a Rodecaster Video S for overhead shots wirelessly from my Pixel phone! Rode have a free app for Iphone.
Please Log in to join the conversation.
Time to create page: 0.074 seconds
