Profile for Oops

Offline

User Type: User
Rank: New Member

Register Date: 15 Feb 2015
Last login: 1 year 6 months ago
Time Zone: UTC -5:00
Local Time: 12:04

Posts: 11
Profile views: 8

Gender: Unknown
Birthdate: Unknown

Oops recent posts (11 messages )

	Subject	Replies / Views	Last Post

	Re:DIgitizing a part with no probe Category: AXIS Topic started 15 years 6 months ago, by prcdslnc13 Last Post 1 year 10 months ago by Oops	Replies:6 Views:8781	Last Post by Oops 1 year 10 months ago
	Re:DIgitizing a part with no probe Category: AXIS Topic started 15 years 6 months ago, by prcdslnc13 Last Post 1 year 10 months ago by Oops	Replies:6 Views:8781	Last Post by Oops 1 year 10 months ago
	Latency High with 2.9.3 on older PC Category: Computers and Hardware Topic started 1 year 10 months ago, by Oops Last Post 1 year 9 months ago by SrLange61	Replies:2 Views:1309	Last Post by SrLange61 1 year 9 months ago
	1/8 to 1/4" shank tooling adaptors or dedicated cutters? Category: Milling Machines Topic started 6 years 2 months ago, by Oops Last Post 6 years 1 month ago by Oops	Replies:1 Views:1444	Last Post by Oops 6 years 1 month ago
	1/8 to 1/4" shank tooling adaptors or dedicated cutters? Category: Milling Machines Topic started 6 years 2 months ago, by Oops Last Post 6 years 1 month ago by Oops	Replies:1 Views:1444	Last Post by Oops 6 years 1 month ago
	LinuxCNC 2.5 on Lucid to 2.7 on Wheezy, save G540 configs or redo? Category: Installing LinuxCNC Topic started 8 years 10 months ago, by Oops Last Post 8 years 10 months ago by BigJohnT	Replies:4 Views:1929	Last Post by BigJohnT 8 years 10 months ago
	LinuxCNC 2.5 on Lucid to 2.7 on Wheezy, save G540 configs or redo? Category: Installing LinuxCNC Topic started 8 years 10 months ago, by Oops Last Post 8 years 10 months ago by BigJohnT	Replies:4 Views:1929	Last Post by BigJohnT 8 years 10 months ago
	LinuxCNC 2.5 on Lucid to 2.7 on Wheezy, save G540 configs or redo? Category: Installing LinuxCNC Topic started 8 years 10 months ago, by Oops Last Post 8 years 10 months ago by BigJohnT	Replies:4 Views:1929	Last Post by BigJohnT 8 years 10 months ago
	G540 + EMC2 = missing steps Category: CNC Machines Topic started 16 years 9 months ago, by biqut2 Last Post 10 years 7 months ago by Oops 1 2 3 ... 6	Replies:51 Views:25.3k	Last Post by Oops 10 years 7 months ago
	G540 + EMC2 = missing steps Category: CNC Machines Topic started 16 years 9 months ago, by biqut2 Last Post 10 years 7 months ago by Oops 1 2 3 ... 6	Replies:51 Views:25.3k	Last Post by Oops 10 years 7 months ago

Time to create page: 0.416 seconds

Powered by Kunena Forum