Profile for ZincBoy

Offline

User Type: User
Rank: Junior Member

Register Date: 31 Aug 2010
Last login: 1 year 6 months ago
Time Zone: UTC +0:00
Local Time: 08:54

Posts: 34
Profile views: 11

Gender: Unknown
Birthdate: Unknown

ZincBoy's recent posts (34 messages )

	Subject	Replies / Views	Last Post

	M66 call hangs and does not return sometimes Category: G&M Codes Topic started 3 years 2 months ago, by ZincBoy Last Post 3 years 2 months ago by ZincBoy	Replies:1 Views:1719	Last Post by ZincBoy 3 years 2 months ago
	M66 call hangs and does not return sometimes Category: G&M Codes Topic started 3 years 2 months ago, by ZincBoy Last Post 3 years 2 months ago by ZincBoy	Replies:1 Views:1719	Last Post by ZincBoy 3 years 2 months ago
	0.005 error randomly accumulating over 30.000 inch travel, solutions etc ?? Category: Advanced Configuration Topic started 3 years 9 months ago, by smc.collins Last Post 3 years 8 months ago by andypugh 1 2	Replies:13 Views:3628	Last Post by andypugh 3 years 8 months ago
	Retrofit of a Hitachi-Seike VK45 mill Category: CNC Machines Topic started 5 years 8 months ago, by ZincBoy Last Post 2 months 2 weeks ago by Carpio 1 2	Replies:13 Views:6279	Last Post by Carpio 2 months 2 weeks ago
	Gmoccapy will abort in auto mode if the jog-increment pins are changed Category: Gmoccapy Topic started 5 years 5 months ago, by ZincBoy Last Post 5 years 5 months ago by newbynobi	Replies:4 Views:1498	Last Post by newbynobi 5 years 5 months ago
	Gmoccapy will abort in auto mode if the jog-increment pins are changed Category: Gmoccapy Topic started 5 years 5 months ago, by ZincBoy Last Post 5 years 5 months ago by newbynobi	Replies:4 Views:1498	Last Post by newbynobi 5 years 5 months ago
	Problem remapping T word Category: Advanced Configuration Topic started 5 years 5 months ago, by ZincBoy Last Post 5 years 5 months ago by bevins	Replies:5 Views:1650	Last Post by bevins 5 years 5 months ago
	Problem remapping T word Category: Advanced Configuration Topic started 5 years 5 months ago, by ZincBoy Last Post 5 years 5 months ago by bevins	Replies:5 Views:1650	Last Post by bevins 5 years 5 months ago
	Manual tool change + tool lengh touch off Category: Advanced Configuration Topic started 15 years 11 months ago, by axel88 Last Post 7 months 1 week ago by rhscdn 1 2 3 ... 15	Replies:148 Views:172k	Last Post by rhscdn 7 months 1 week ago
	Retrofit of a Hitachi-Seike VK45 mill Category: CNC Machines Topic started 5 years 8 months ago, by ZincBoy Last Post 2 months 2 weeks ago by Carpio 1 2	Replies:13 Views:6279	Last Post by Carpio 2 months 2 weeks ago

Time to create page: 0.092 seconds

Powered by Kunena Forum