Profile for rogerxue

Offline

User Type: User
Rank: Senior Member

Register Date: 10 Mar 2017
Last login: 4 years 11 months ago
Time Zone: UTC +0:00
Local Time: 13:04

Posts: 44
Profile views: 9

Gender: Unknown
Birthdate: Unknown

rogerxue's recent posts (44 messages )

	Subject	Replies / Views	Last Post

	potential bug with MDI move before homing Category: General LinuxCNC Questions Topic started 5 years 5 months ago, by rogerxue Last Post 5 years 5 months ago by rogerxue	Replies:3 Views:1185	Last Post by rogerxue 5 years 5 months ago
	potential bug with MDI move before homing Category: General LinuxCNC Questions Topic started 5 years 5 months ago, by rogerxue Last Post 5 years 5 months ago by rogerxue	Replies:3 Views:1185	Last Post by rogerxue 5 years 5 months ago
	read tool table from Gcode Category: General LinuxCNC Questions Topic started 5 years 5 months ago, by rogerxue Last Post 5 years 5 months ago by bevins	Replies:1 Views:1246	Last Post by bevins 5 years 5 months ago
	M66 not waiting on input Category: Basic Configuration Topic started 5 years 6 months ago, by rogerxue Last Post 5 years 5 months ago by rogerxue	Replies:3 Views:1881	Last Post by rogerxue 5 years 5 months ago
	updated to 2.8 now tool change pauses Category: General LinuxCNC Questions Topic started 5 years 9 months ago, by rogerxue Last Post 5 years 5 months ago by rogerxue 1 2	Replies:11 Views:2796	Last Post by rogerxue 5 years 5 months ago
	updated to 2.8 now tool change pauses Category: General LinuxCNC Questions Topic started 5 years 9 months ago, by rogerxue Last Post 5 years 5 months ago by rogerxue 1 2	Replies:11 Views:2796	Last Post by rogerxue 5 years 5 months ago
	make G code display error Category: G&M Codes Topic started 5 years 5 months ago, by rogerxue Last Post 5 years 5 months ago by andypugh	Replies:1 Views:1814	Last Post by andypugh 5 years 5 months ago
	M66 not waiting on input Category: Basic Configuration Topic started 5 years 6 months ago, by rogerxue Last Post 5 years 5 months ago by rogerxue	Replies:3 Views:1881	Last Post by rogerxue 5 years 5 months ago
	updated to 2.8 now tool change pauses Category: General LinuxCNC Questions Topic started 5 years 9 months ago, by rogerxue Last Post 5 years 5 months ago by rogerxue 1 2	Replies:11 Views:2796	Last Post by rogerxue 5 years 5 months ago
	M66 not waiting on input Category: Basic Configuration Topic started 5 years 6 months ago, by rogerxue Last Post 5 years 5 months ago by rogerxue	Replies:3 Views:1881	Last Post by rogerxue 5 years 5 months ago

Time to create page: 0.324 seconds

Powered by Kunena Forum