Profile for 7sharp

Offline

User Type: User
Rank: New Member

Register Date: 24 Apr 2017
Last login: 7 years 5 months ago
Time Zone: UTC +0:00
Local Time: 10:57

Posts: 7
Profile views: 2

Gender: Unknown
Birthdate: Unknown

7sharp's recent posts (7 messages )

	Subject	Replies / Views	Last Post

	Advice on setting up Proma THC with gecko G540 Category: Plasma & Laser Topic started 7 years 5 months ago, by 7sharp Last Post 7 years 5 months ago by tommylight	Replies:3 Views:2188	Last Post by tommylight 7 years 5 months ago
	Question on setting up spindle check/error Category: Basic Configuration Topic started 7 years 9 months ago, by 7sharp Last Post 7 years 9 months ago by andypugh	Replies:1 Views:1403	Last Post by andypugh 7 years 9 months ago
	Cant get plasma going Category: Plasma & Laser Topic started 7 years 11 months ago, by 7sharp Last Post 7 years 11 months ago by PCW	Replies:4 Views:1969	Last Post by PCW 7 years 11 months ago
	Cant get plasma going Category: Plasma & Laser Topic started 7 years 11 months ago, by 7sharp Last Post 7 years 11 months ago by PCW	Replies:4 Views:1969	Last Post by PCW 7 years 11 months ago
	basic question on how to add a feature Category: General LinuxCNC Questions Topic started 8 years 3 weeks ago, by 7sharp Last Post 8 years 2 weeks ago by andypugh	Replies:2 Views:1128	Last Post by andypugh 8 years 2 weeks ago
	Desperate for help with identifying problem; computer, drivers, or steppers Category: General LinuxCNC Questions Topic started 9 years 6 months ago, by 7sharp Last Post 9 years 6 months ago by tommylight	Replies:3 Views:1257	Last Post by tommylight 9 years 6 months ago
	Desperate for help with identifying problem; computer, drivers, or steppers Category: General LinuxCNC Questions Topic started 9 years 6 months ago, by 7sharp Last Post 9 years 6 months ago by tommylight	Replies:3 Views:1257	Last Post by tommylight 9 years 6 months ago

Time to create page: 0.196 seconds

Powered by Kunena Forum