Profile for Captainjack

Offline

User Type: User
Rank: New Member

Register Date: 01 Aug 2017
Last login: 2 years 5 months ago
Time Zone: UTC +0:00
Local Time: 09:29

Posts: 8
Profile views: 3

Gender: Unknown
Birthdate: Unknown

Captainjack's recent posts (8 messages )

	Subject	Replies / Views	Last Post

	Steppers work ok in pncconf tests but not with Axis Category: AXIS Topic started 2 years 6 months ago, by Captainjack Last Post 2 years 6 months ago by Captainjack	Replies:3 Views:1235	Last Post by Captainjack 2 years 6 months ago
	Steppers work ok in pncconf tests but not with Axis Category: AXIS Topic started 2 years 6 months ago, by Captainjack Last Post 2 years 6 months ago by Captainjack	Replies:3 Views:1235	Last Post by Captainjack 2 years 6 months ago
	Steppers work ok in pncconf tests but not with Axis Category: AXIS Topic started 2 years 6 months ago, by Captainjack Last Post 2 years 6 months ago by Captainjack	Replies:3 Views:1235	Last Post by Captainjack 2 years 6 months ago
	Milling machine stepper axis shuts down with following error Category: Driver Boards Topic started 5 years 5 months ago, by Captainjack Last Post 5 years 5 months ago by Captainjack	Replies:7 Views:1178	Last Post by Captainjack 5 years 5 months ago
	Milling machine stepper axis shuts down with following error Category: Driver Boards Topic started 5 years 5 months ago, by Captainjack Last Post 5 years 5 months ago by Captainjack	Replies:7 Views:1178	Last Post by Captainjack 5 years 5 months ago
	Milling machine stepper axis shuts down with following error Category: Driver Boards Topic started 5 years 5 months ago, by Captainjack Last Post 5 years 5 months ago by Captainjack	Replies:7 Views:1178	Last Post by Captainjack 5 years 5 months ago
	PnCConf stepper test tune works but changes are not accepted by Axis gui Category: PnCConf Wizard Topic started 5 years 9 months ago, by Captainjack Last Post 5 years 9 months ago by Captainjack	Replies:2 Views:1523	Last Post by Captainjack 5 years 9 months ago
	PnCConf stepper test tune works but changes are not accepted by Axis gui Category: PnCConf Wizard Topic started 5 years 9 months ago, by Captainjack Last Post 5 years 9 months ago by Captainjack	Replies:2 Views:1523	Last Post by Captainjack 5 years 9 months ago

Time to create page: 0.105 seconds

Powered by Kunena Forum