Profile for DaveRosario

Offline

User Type: User
Rank: New Member

Register Date: 12 Mar 2019
Last login: 5 years 9 months ago
Time Zone: UTC -7:00
Local Time: 21:09

Posts: 14
Profile views: 3

Gender: Unknown
Birthdate: Unknown

DaveRosario's recent posts (14 messages )

	Subject	Replies / Views	Last Post

	Mesa 7i76e CR2 red led on at power up Category: General LinuxCNC Questions Topic started 7 years 6 months ago, by DaveRosario Last Post 5 years 9 months ago by andypugh 1 2	Replies:12 Views:3475	Last Post by andypugh 5 years 9 months ago
	Gmoccapy: no audio available Category: General LinuxCNC Questions Topic started 6 years 11 months ago, by DaveRosario Last Post 6 years 11 months ago by DaveRosario	Replies:2 Views:1259	Last Post by DaveRosario 6 years 11 months ago
	Gmoccapy: User Tab dissables after manually editing offsets Category: Gmoccapy Topic started 6 years 11 months ago, by DaveRosario Last Post 6 years 4 weeks ago by Nitram	Replies:4 Views:2341	Last Post by Nitram 6 years 4 weeks ago
	Gmoccapy: no audio available Category: General LinuxCNC Questions Topic started 6 years 11 months ago, by DaveRosario Last Post 6 years 11 months ago by DaveRosario	Replies:2 Views:1259	Last Post by DaveRosario 6 years 11 months ago
	Mesa 7i76e CR2 red led on at power up Category: General LinuxCNC Questions Topic started 7 years 6 months ago, by DaveRosario Last Post 5 years 9 months ago by andypugh 1 2	Replies:12 Views:3475	Last Post by andypugh 5 years 9 months ago
	Mesa 7i76e CR2 red led on at power up Category: General LinuxCNC Questions Topic started 7 years 6 months ago, by DaveRosario Last Post 5 years 9 months ago by andypugh 1 2	Replies:12 Views:3475	Last Post by andypugh 5 years 9 months ago
	Mesa 7i76e CR2 red led on at power up Category: General LinuxCNC Questions Topic started 7 years 6 months ago, by DaveRosario Last Post 5 years 9 months ago by andypugh 1 2	Replies:12 Views:3475	Last Post by andypugh 5 years 9 months ago
	stepgen step_type2 (quadrature driven steppers) Help Category: Advanced Configuration Topic started 7 years 6 months ago, by DaveRosario Last Post 7 years 6 months ago by DaveRosario 1 2	Replies:11 Views:4203	Last Post by DaveRosario 7 years 6 months ago
	stepgen step_type2 (quadrature driven steppers) Help Category: Advanced Configuration Topic started 7 years 6 months ago, by DaveRosario Last Post 7 years 6 months ago by DaveRosario 1 2	Replies:11 Views:4203	Last Post by DaveRosario 7 years 6 months ago
	stepgen step_type2 (quadrature driven steppers) Help Category: Advanced Configuration Topic started 7 years 6 months ago, by DaveRosario Last Post 7 years 6 months ago by DaveRosario 1 2	Replies:11 Views:4203	Last Post by DaveRosario 7 years 6 months ago

Time to create page: 6.496 seconds

Powered by Kunena Forum