Profile for tachoknight

Offline

User Type: User
Rank: New Member

Register Date: 22 Sep 2020
Last login: 3 years 10 months ago
Time Zone: UTC +0:00
Local Time: 09:47

Posts: 9
Profile views: 3

Gender: Unknown
Birthdate: Unknown

tachoknight's recent posts (9 messages )

	Subject	Replies / Views	Last Post

	Sheetcam to Tormach 1300PL? Category: Post Processors Topic started 3 years 10 months ago, by tachoknight Last Post 3 years 10 months ago by tachoknight	Replies:6 Views:1969	Last Post by tachoknight 3 years 10 months ago
	Sheetcam to Tormach 1300PL? Category: Post Processors Topic started 3 years 10 months ago, by tachoknight Last Post 3 years 10 months ago by tachoknight	Replies:6 Views:1969	Last Post by tachoknight 3 years 10 months ago
	Sheetcam to Tormach 1300PL? Category: Post Processors Topic started 3 years 10 months ago, by tachoknight Last Post 3 years 10 months ago by tachoknight	Replies:6 Views:1969	Last Post by tachoknight 3 years 10 months ago
	Sheetcam to Tormach 1300PL? Category: Post Processors Topic started 3 years 10 months ago, by tachoknight Last Post 3 years 10 months ago by tachoknight	Replies:6 Views:1969	Last Post by tachoknight 3 years 10 months ago
	Took board out of bag, attached board, burned out board. What did I do wrong? Category: Driver Boards Topic started 4 years 2 months ago, by tachoknight Last Post 4 years 2 months ago by PCW	Replies:3 Views:1042	Last Post by PCW 4 years 2 months ago
	Took board out of bag, attached board, burned out board. What did I do wrong? Category: Driver Boards Topic started 4 years 2 months ago, by tachoknight Last Post 4 years 2 months ago by PCW	Replies:3 Views:1042	Last Post by PCW 4 years 2 months ago
	7I76 Hooked up and good to go...uh, what do I do now? Category: Driver Boards Topic started 4 years 3 months ago, by tachoknight Last Post 4 years 3 months ago by JT	Replies:4 Views:2198	Last Post by JT 4 years 3 months ago
	7I76 Hooked up and good to go...uh, what do I do now? Category: Driver Boards Topic started 4 years 3 months ago, by tachoknight Last Post 4 years 3 months ago by JT	Replies:4 Views:2198	Last Post by JT 4 years 3 months ago
	Getting started with Plasmac...? Category: Plasmac Topic started 4 years 6 months ago, by tachoknight Last Post 4 years 6 months ago by tommylight	Replies:1 Views:1585	Last Post by tommylight 4 years 6 months ago

Time to create page: 0.091 seconds

Powered by Kunena Forum