Profile for Archidea

Offline

User Type: User
Rank: New Member

Register Date: 11 Oct 2020
Last login: 4 years 7 months ago
Time Zone: UTC +0:00
Local Time: 11:04

Posts: 12
Profile views: 1

Gender: Unknown
Birthdate: Unknown

Archidea's recent posts (12 messages )

	Subject	Replies / Views	Last Post

	Mesa 7i76E laser diode control (TTL) Category: General LinuxCNC Questions Topic started 5 years 7 months ago, by robertspark Last Post 4 years 7 months ago by PCW	Replies:8 Views:2224	Last Post by PCW 4 years 7 months ago
	MESA 7I76e + BOB - Hardware PWMgen configuration for laser control Category: Plasma & Laser Topic started 4 years 7 months ago, by Archidea Last Post 4 years 7 months ago by andypugh	Replies:5 Views:1974	Last Post by andypugh 4 years 7 months ago
	MESA 7I76e + BOB - Hardware PWMgen configuration for laser control Category: Plasma & Laser Topic started 4 years 7 months ago, by Archidea Last Post 4 years 7 months ago by andypugh	Replies:5 Views:1974	Last Post by andypugh 4 years 7 months ago
	MESA 7I76e + BOB - Hardware PWMgen configuration for laser control Category: Plasma & Laser Topic started 4 years 7 months ago, by Archidea Last Post 4 years 7 months ago by andypugh	Replies:5 Views:1974	Last Post by andypugh 4 years 7 months ago
	Mesa 7i76E laser diode control (TTL) Category: General LinuxCNC Questions Topic started 5 years 7 months ago, by robertspark Last Post 4 years 7 months ago by PCW	Replies:8 Views:2224	Last Post by PCW 4 years 7 months ago
	Mesa 7i76E laser diode control (TTL) Category: General LinuxCNC Questions Topic started 5 years 7 months ago, by robertspark Last Post 4 years 7 months ago by PCW	Replies:8 Views:2224	Last Post by PCW 4 years 7 months ago
	Rules problem - XHC pendant naming - Resolved!! Category: HAL Topic started 5 years 7 months ago, by Muzzer Last Post 5 years 2 months ago by Archidea	Replies:4 Views:2375	Last Post by Archidea 5 years 2 months ago
	How to display the macro button gmoccapy.h-button-0 Category: Gmoccapy Topic started 7 years 11 months ago, by Philippe Last Post 5 years 2 months ago by Aciera	Replies:9 Views:3087	Last Post by Aciera 5 years 2 months ago
	How to display the macro button gmoccapy.h-button-0 Category: Gmoccapy Topic started 7 years 11 months ago, by Philippe Last Post 5 years 2 months ago by Aciera	Replies:9 Views:3087	Last Post by Aciera 5 years 2 months ago
	Mesa choice for 6 axis CNC and servo spindle Category: Driver Boards Topic started 6 years 2 weeks ago, by Archidea Last Post 5 years 3 months ago by Archidea	Replies:5 Views:3727	Last Post by Archidea 5 years 3 months ago

Time to create page: 0.187 seconds

Powered by Kunena Forum