Profile for dgdodo

Offline

User Type: User
Rank: New Member

Register Date: 08 Nov 2021
Last login: 11 months 1 week ago
Time Zone: UTC +1:00
Local Time: 13:09

Posts: 12
Profile views: 3

Gender: Unknown
Birthdate: Unknown

dgdodo's recent posts (12 messages )

	Subject	Replies / Views	Last Post

	[SOLVED] Backlash issues on Y-AXIS Category: Advanced Configuration Topic started 11 months 2 weeks ago, by dgdodo Last Post 11 months 1 week ago by unknown 1 2	Replies:15 Views:3402	Last Post by unknown 11 months 1 week ago
	[SOLVED] Backlash issues on Y-AXIS Category: Advanced Configuration Topic started 11 months 2 weeks ago, by dgdodo Last Post 11 months 1 week ago by unknown 1 2	Replies:15 Views:3402	Last Post by unknown 11 months 1 week ago
	[SOLVED] Backlash issues on Y-AXIS Category: Advanced Configuration Topic started 11 months 2 weeks ago, by dgdodo Last Post 11 months 1 week ago by unknown 1 2	Replies:15 Views:3402	Last Post by unknown 11 months 1 week ago
	[SOLVED] Backlash issues on Y-AXIS Category: Advanced Configuration Topic started 11 months 2 weeks ago, by dgdodo Last Post 11 months 1 week ago by unknown 1 2	Replies:15 Views:3402	Last Post by unknown 11 months 1 week ago
	[SOLVED] Backlash issues on Y-AXIS Category: Advanced Configuration Topic started 11 months 2 weeks ago, by dgdodo Last Post 11 months 1 week ago by unknown 1 2	Replies:15 Views:3402	Last Post by unknown 11 months 1 week ago
	[SOLVED] Backlash issues on Y-AXIS Category: Advanced Configuration Topic started 11 months 2 weeks ago, by dgdodo Last Post 11 months 1 week ago by unknown 1 2	Replies:15 Views:3402	Last Post by unknown 11 months 1 week ago
	How to fill pwmgen.0.offset with value of mux2.0.out ? Category: Basic Configuration Topic started 4 years 11 months ago, by dgdodo Last Post 4 years 11 months ago by tommylight	Replies:2 Views:1537	Last Post by tommylight 4 years 11 months ago
	How to fill pwmgen.0.offset with value of mux2.0.out ? Category: Basic Configuration Topic started 4 years 11 months ago, by dgdodo Last Post 4 years 11 months ago by tommylight	Replies:2 Views:1537	Last Post by tommylight 4 years 11 months ago
	Help me install on Raspbian 10 - via Rasberry Pi 3B Category: Installing LinuxCNC Topic started 5 years 2 months ago, by dudesquat Last Post 4 years 11 months ago by andypugh	Replies:9 Views:2414	Last Post by andypugh 4 years 11 months ago
	Unable to connect to direct stepper motors (28BYJ-48) Category: Basic Configuration Topic started 4 years 11 months ago, by dgdodo Last Post 4 years 11 months ago by dgdodo	Replies:5 Views:1788	Last Post by dgdodo 4 years 11 months ago

Time to create page: 0.539 seconds

Powered by Kunena Forum