Profile for dog

Offline

User Type: User
Rank: New Member

Register Date: 15 Apr 2023
Last login: 10 months 4 weeks ago
Time Zone: UTC +0:00
Local Time: 09:20

Posts: 7
Profile views: 3

Gender: Unknown
Birthdate: Unknown

dog's recent posts (7 messages )

	Subject	Replies / Views	Last Post

	looking to tweak a working system for more accuracy Category: Basic Configuration Topic started 10 months 4 weeks ago, by dog Last Post 10 months 4 weeks ago by unknown	Replies:1 Views:850	Last Post by unknown 10 months 4 weeks ago
	following errors with stepgen in velocity mode with PID using parallel port Category: Basic Configuration Topic started 3 years 3 months ago, by dog Last Post 3 years 3 months ago by dog	Replies:4 Views:1351	Last Post by dog 3 years 3 months ago
	following errors with stepgen in velocity mode with PID using parallel port Category: Basic Configuration Topic started 3 years 3 months ago, by dog Last Post 3 years 3 months ago by dog	Replies:4 Views:1351	Last Post by dog 3 years 3 months ago
	following errors with stepgen in velocity mode with PID using parallel port Category: Basic Configuration Topic started 3 years 3 months ago, by dog Last Post 3 years 3 months ago by dog	Replies:4 Views:1351	Last Post by dog 3 years 3 months ago
	I think I found a bug Category: StepConf Wizard Topic started 3 years 5 months ago, by dog Last Post 3 years 5 months ago by dog	Replies:1 Views:2030	Last Post by dog 3 years 5 months ago
	I think I found a bug Category: StepConf Wizard Topic started 3 years 5 months ago, by dog Last Post 3 years 5 months ago by dog	Replies:1 Views:2030	Last Post by dog 3 years 5 months ago
	retrofit of Servosource Servo-II CNC knee mill Category: CNC Machines Topic started 3 years 6 months ago, by dog Last Post 3 years 6 months ago by andypugh	Replies:1 Views:2327	Last Post by andypugh 3 years 6 months ago

Time to create page: 0.103 seconds

Powered by Kunena Forum