Profile for winyk

Offline

User Type: User
Rank: New Member

Register Date: 07 Aug 2024
Last login: 2 years 1 month ago
Time Zone: UTC +0:00
Local Time: 13:16

Posts: 6
Profile views: 1

Gender: Unknown
Birthdate: Unknown

winyk's recent posts (6 messages )

	Subject	Replies / Views	Last Post

	How to make HAL pins from .c kinematics file? Category: HAL Topic started 2 years 2 months ago, by winyk Last Post 2 years 2 months ago by mighty_mick	Replies:3 Views:1465	Last Post by mighty_mick 2 years 2 months ago
	How to add user kinematics for 5 axis bridge mill? Category: General LinuxCNC Questions Topic started 2 years 2 months ago, by winyk Last Post 2 years 2 months ago by Aciera	Replies:1 Views:1387	Last Post by Aciera 2 years 2 months ago
	How can I modify trivkins.c? (and also other kinematics files) Category: General LinuxCNC Questions Topic started 2 years 2 months ago, by winyk Last Post 2 years 2 months ago by mighty_mick	Replies:8 Views:2543	Last Post by mighty_mick 2 years 2 months ago
	How can I modify trivkins.c? (and also other kinematics files) Category: General LinuxCNC Questions Topic started 2 years 2 months ago, by winyk Last Post 2 years 2 months ago by mighty_mick	Replies:8 Views:2543	Last Post by mighty_mick 2 years 2 months ago
	How can I modify trivkins.c? (and also other kinematics files) Category: General LinuxCNC Questions Topic started 2 years 2 months ago, by winyk Last Post 2 years 2 months ago by mighty_mick	Replies:8 Views:2543	Last Post by mighty_mick 2 years 2 months ago
	How can I modify trivkins.c? (and also other kinematics files) Category: General LinuxCNC Questions Topic started 2 years 2 months ago, by winyk Last Post 2 years 2 months ago by mighty_mick	Replies:8 Views:2543	Last Post by mighty_mick 2 years 2 months ago

Time to create page: 0.090 seconds

Powered by Kunena Forum