Profile for Tom369

Offline

User Type: User
Rank: New Member

Register Date: 27 Apr 2025
Last login: 1 year 4 months ago
Time Zone: UTC +0:00
Local Time: 16:41

Posts: 7
Profile views: 2

Gender: Unknown
Birthdate: Unknown

Tom369's recent posts (7 messages )

	Subject	Replies / Views	Last Post

	Problem: Analog jog via gamepad does not move axis in LinuxCNC Category: General LinuxCNC Questions Topic started 1 year 4 months ago, by Tom369 Last Post 11 months 4 weeks ago by nova8080	Replies:5 Views:1601	Last Post by nova8080 11 months 4 weeks ago
	Problem: Analog jog via gamepad does not move axis in LinuxCNC Category: General LinuxCNC Questions Topic started 1 year 4 months ago, by Tom369 Last Post 11 months 4 weeks ago by nova8080	Replies:5 Views:1601	Last Post by nova8080 11 months 4 weeks ago
	Optic encoder Category: General LinuxCNC Questions Topic started 1 year 4 months ago, by Tom369 Last Post 1 year 4 months ago by PCW	Replies:1 Views:659	Last Post by PCW 1 year 4 months ago
	Mesa 79i6s CR8 (yellow) Category: General LinuxCNC Questions Topic started 1 year 5 months ago, by Tom369 Last Post 1 year 5 months ago by PCW	Replies:3 Views:602	Last Post by PCW 1 year 5 months ago
	Mesa 79i6s CR8 (yellow) Category: General LinuxCNC Questions Topic started 1 year 5 months ago, by Tom369 Last Post 1 year 5 months ago by PCW	Replies:3 Views:602	Last Post by PCW 1 year 5 months ago
	Allgemeine Frage und Problem:hm2/hm2_7i96s_0: error finishing read! iter=1256216 Category: General LinuxCNC Questions Topic started 1 year 6 months ago, by Tom369 Last Post 1 year 6 months ago by Tom369	Replies:3 Views:732	Last Post by Tom369 1 year 6 months ago
	Allgemeine Frage und Problem:hm2/hm2_7i96s_0: error finishing read! iter=1256216 Category: General LinuxCNC Questions Topic started 1 year 6 months ago, by Tom369 Last Post 1 year 6 months ago by Tom369	Replies:3 Views:732	Last Post by Tom369 1 year 6 months ago

Time to create page: 0.401 seconds

Powered by Kunena Forum