Profile for yello

Offline

User Type: User
Rank: New Member

Register Date: 12 Apr 2012
Last login: 3 years 9 months ago
Time Zone: UTC +0:00
Local Time: 09:29

Posts: 15
Profile views: 10

Gender: Unknown
Birthdate: Unknown

yello's recent posts (15 messages )

	Subject	Replies / Views	Last Post

	Can OpenPNP run on LinuxCNC? Category: Pick and Place Topic started 3 years 9 months ago, by yello Last Post 3 years 8 months ago by aabtech	Replies:4 Views:3302	Last Post by aabtech 3 years 8 months ago
	Hardware requirements? I have some really old hardware.... Category: Installing LinuxCNC Topic started 3 years 9 months ago, by yello Last Post 3 years 9 months ago by yello	Replies:6 Views:1806	Last Post by yello 3 years 9 months ago
	Hardware requirements? I have some really old hardware.... Category: Installing LinuxCNC Topic started 3 years 9 months ago, by yello Last Post 3 years 9 months ago by yello	Replies:6 Views:1806	Last Post by yello 3 years 9 months ago
	Hardware requirements? I have some really old hardware.... Category: Installing LinuxCNC Topic started 3 years 9 months ago, by yello Last Post 3 years 9 months ago by yello	Replies:6 Views:1806	Last Post by yello 3 years 9 months ago
	Hardware requirements? I have some really old hardware.... Category: Installing LinuxCNC Topic started 3 years 9 months ago, by yello Last Post 3 years 9 months ago by yello	Replies:6 Views:1806	Last Post by yello 3 years 9 months ago
	Retrofit a solder robot? Category: General LinuxCNC Questions Topic started 9 years 3 months ago, by yello Last Post 9 years 3 months ago by andypugh	Replies:3 Views:2130	Last Post by andypugh 9 years 3 months ago
	Retrofit a solder robot? Category: General LinuxCNC Questions Topic started 9 years 3 months ago, by yello Last Post 9 years 3 months ago by andypugh	Replies:3 Views:2130	Last Post by andypugh 9 years 3 months ago
	PCB milling with laser - power off when Z is up Category: G&M Codes Topic started 13 years 2 weeks ago, by yello Last Post 13 years 2 weeks ago by andypugh	Replies:7 Views:4116	Last Post by andypugh 13 years 2 weeks ago
	PCB milling with laser - power off when Z is up Category: G&M Codes Topic started 13 years 2 weeks ago, by yello Last Post 13 years 2 weeks ago by andypugh	Replies:7 Views:4116	Last Post by andypugh 13 years 2 weeks ago
	How to set ZERO and a few more questions (PCB use) Category: G&M Codes Topic started 13 years 4 months ago, by yello Last Post 13 years 4 months ago by BigJohnT	Replies:6 Views:5536	Last Post by BigJohnT 13 years 4 months ago

Time to create page: 0.095 seconds

Powered by Kunena Forum