Need electrical schematics for Maho MH 800 C

Good day everyone,
My name is Volodymyr. I got a secondhand MAHO MH 800 C (CNC 432)
I am need of the electrical schematic diagram of this machine.
If anyone has a soft-copy (pdf, image file) of the schematics then please send me a copy to my email: spec-cnc@ukr.net.
If there is a link where to get the scheme
I would be very grateful if you could.
Best regards,
Volodymyr

Hello! I have the wiring diagrams of the machine. If you need wiring diagrams, write to the mail. Thank.

I knew i know that name for before, she keeps going back and adding links, this was the third warning so she is out!
Bye PrincessJasmW !

tommylight wrote: I knew i know that name for before, she keeps going back and adding links, this was the third warning so she is out!
Bye PrincessJasmW !

There should not be a warning on stuff like this. Just can them straight away Tommy

Being polite !
Thanks for the reports, all.

I have been collecting all the Maho schematics I encounter. Dont have any for the 800C, but sent you to a set for a 700C.

These big machines were highly customised, so I doubt that any two schematics are identical based on ATC, pallet, fourth axis etc options. Also this model designation was used for a long time, so there are different generations of drives etc. But generally Maho was pretty consistant with there terminology, so I hope the 700C schematic helps a bit.

Also contact DMG. The schematic number for the machine should be on a sticker on the electrical cabinet door. They still have all the schematics for all these machines on file.
Mark