Forum Menu

Profile for rodw

Offline
  • User Type: User
  • Rank: Platinum Member Platinum Member
  • Register Date: 17 Jun 2015
  • Last login: 2 days 20 hours ago
  • Time Zone: UTC +0:00
  • Local Time: 20:34
  • Posts: 12169
  • Karma: 15
  • Profile views: 7
  • Thank you received: 4153
  • Gender: Unknown
  • Birthdate: Unknown


rodw's recent posts (12.2k messages )

Subject Replies / Views Last Post
Category: General LinuxCNC Questions
Topic started 4 days 3 hours ago, by CNCJIM
Last Post 2 days 20 hours ago
by rodw
Replies:6
Views:152
Last Post by rodw
2 days 20 hours ago
Category: EtherCAT
Topic started 3 days 21 hours ago, by mwc
Last Post 2 days 20 hours ago
by rodw
Replies:2
Views:150
Last Post by rodw
2 days 20 hours ago
Category: EtherCAT
Topic started 3 years 10 months ago, by mwc
Last Post 2 days 20 hours ago
by rodw
Replies:89
Views:26.9k
Last Post by rodw
2 days 20 hours ago
Category: EtherCAT
Topic started 3 years 10 months ago, by mwc
Last Post 2 days 20 hours ago
by rodw
Replies:89
Views:26.9k
Last Post by rodw
2 days 20 hours ago
Category: EtherCAT
Topic started 3 years 10 months ago, by mwc
Last Post 2 days 20 hours ago
by rodw
Replies:89
Views:26.9k
Last Post by rodw
2 days 20 hours ago
Category: General LinuxCNC Questions
Topic started 4 days 3 hours ago, by CNCJIM
Last Post 2 days 20 hours ago
by rodw
Replies:6
Views:152
Last Post by rodw
2 days 20 hours ago
Category: EtherCAT
Topic started 5 days 1 hour ago, by tuxcnc
Last Post 3 days 15 hours ago
by rodw
Replies:6
Views:222
Last Post by rodw
3 days 15 hours ago
Category: EtherCAT
Topic started 5 days 1 hour ago, by tuxcnc
Last Post 3 days 15 hours ago
by rodw
Replies:6
Views:222
Last Post by rodw
3 days 15 hours ago
Category: EtherCAT
Topic started 2 months 4 days ago, by mwc
Last Post 4 days 13 hours ago
by rodw
Replies:13
Views:1070
Last Post by rodw
4 days 13 hours ago
Category: EtherCAT
Topic started 2 weeks 1 hour ago, by tuxcnc
Last Post 6 days 7 hours ago
by tuxcnc
Replies:10
Views:579
Last Post by tuxcnc
6 days 7 hours ago
Time to create page: 0.577 seconds
Powered by Kunena Forum