xyz proturn 410 lx2 conversion
24 Aug 2012 12:11 #23618
by edscrane1
xyz proturn 410 lx2 conversion was created by edscrane1
I planning to convert a Beaver NC5 mill with Anilam GX2 control to Linuxcnc. Another thread looks to be very helpfull and of an identical conversion except the base machine is a Bridgeport.
The anilam conversion uses MESA 5I25 and 7I77 boards.
Does anyone know if these boards would work with the servo drivers / rotary encoders on an xyz proturn 410 lathe with Southwestern Industries LX2 control?
Thanks for any help.
The anilam conversion uses MESA 5I25 and 7I77 boards.
Does anyone know if these boards would work with the servo drivers / rotary encoders on an xyz proturn 410 lathe with Southwestern Industries LX2 control?
Thanks for any help.
Please Log in or Create an account to join the conversation.
24 Aug 2012 16:51 #23632
by BigJohnT
Replied by BigJohnT on topic Re:xyz proturn 410 lx2 conversion
I'm not familiar with the Anilam controller you have but my Anilam 1100M the drives are velocity input with encoder feedback which when I find my roundtuit I should finish up the conversion to 5i25 7i77.
John
John
Please Log in or Create an account to join the conversation.
Time to create page: 0.105 seconds