Forum Menu

Massive Latency, and no PCI port Acer

More
6 years 3 months ago #175853 by riversvic
Replied by riversvic on topic Massive Latency, and no PCI port Acer
I played around with the memory, There was a SK hynix 2GB stick and a 4 gb stick

4GB Removed


2GB Removed


Both removed and 1 Ballistix Sport 4 GB placed in, I tried 2 of these but it was higher

Please Log in or Create an account to join the conversation.

More
6 years 3 months ago #175873 by tommylight
Replied by tommylight on topic Massive Latency, and no PCI port Acer
The last one looks usable, if you do not need the base thread, so try this
latency-histogram --nobase --sbinsize 1000 --show
Also you should use the 4.9 kernel from here:
forum.linuxcnc.org/9-installing-linuxcnc...-nearly-easy-install
It has a bit better latency.
www.youtube.com/@toma.cnc1
www.youtube.com/@toma.3d
www.youtube.com/@tomapc

Please Log in or Create an account to join the conversation.

More
6 years 3 months ago #175930 by riversvic
Replied by riversvic on topic Massive Latency, and no PCI port Acer
4.9 with (1) 4GB stick still

The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

More
6 years 3 months ago #175940 by tommylight
Replied by tommylight on topic Massive Latency, and no PCI port Acer
Now we're cooking ! :)
That looks really nice, but just in case, try to play some youtube videos and copy some stuff around at the same time.
www.youtube.com/@toma.cnc1
www.youtube.com/@toma.3d
www.youtube.com/@tomapc

Please Log in or Create an account to join the conversation.

More
6 years 3 months ago #175943 by riversvic
Replied by riversvic on topic Massive Latency, and no PCI port Acer
Thank You for all your Help! during that I was playing Furious 9 video trailer on youtube and resized a glxgears to a bigger window. Is there a way I can change it to always boot to 4.9?

Please Log in or Create an account to join the conversation.

More
6 years 3 months ago #175949 by tommylight
Replied by tommylight on topic Massive Latency, and no PCI port Acer
forum.linuxcnc.org/9-installing-linuxcnc...ion?start=280#175932
www.youtube.com/@toma.cnc1
www.youtube.com/@toma.3d
www.youtube.com/@tomapc
The following user(s) said Thank You: riversvic

Please Log in or Create an account to join the conversation.

Time to create page: 0.387 seconds
Powered by Kunena Forum