Using Axis-Remote over SSH

I came up with a primitive but functional solution to use axis-remote over ssh. You can read about the approach and download some code to implement the mdi mode here:

github.com/rbmadigan/axis-remote-ssh-fix...is_remote_client/src

comments and improvements are welcome.

Bruce

This works for me to a machine running LinuxCNC with
the axis gui displayed on that machine: (--help used
for testing):

The above requires machine_running_axis to have a deb
install of LinuxCNC so that axis-remote is in the
default path that includes /usr/bin

For a RIP build, one would need to specify the
specific location of axis-remote, for example:


I have /etc/ssh/sshd_config:X11Forwarding yes
but i dont think it matters since the command
above is not forwarding.