Using internal servodrive homing function (DS402 drives)

5 years 7 months ago #202628 by db1981

Replied by db1981 on topic Using internal servodrive homing function (DS402 drives)

ok, and this was an f-error internal in the servo-drive or from linuxcnc.

Please Log in or Create an account to join the conversation.

5 years 7 months ago #202652 by JimPanski

Replied by JimPanski on topic Using internal servodrive homing function (DS402 drives)

Yes, f-error in the drive not lcnc.

Please Log in or Create an account to join the conversation.

Time to create page: 0.262 seconds