Installing xhc-whb04b-6 in LinuxCNC 2.7
15 Jun 2022 19:36 #245217
by Wirewrap
Installing xhc-whb04b-6 in LinuxCNC 2.7 was created by Wirewrap
I am running a milling machine on LinuxCNC 2.7.14 with an old wireless xhc-wb04 pendant.
I would like to switch to a new xhc-whb04b-4 pendant, the version with USB cable connection.
I have read the thread forum.linuxcnc.org/24-hal-components/450...xhc-whb04b-4-pendant
My question, is it possible to install under 2.7 or should I migrate to 2.8 first?
I would like to switch to a new xhc-whb04b-4 pendant, the version with USB cable connection.
I have read the thread forum.linuxcnc.org/24-hal-components/450...xhc-whb04b-4-pendant
My question, is it possible to install under 2.7 or should I migrate to 2.8 first?
Please Log in or Create an account to join the conversation.
15 Jun 2022 21:22 #245231
by andypugh
Replied by andypugh on topic Installing xhc-whb04b-6 in LinuxCNC 2.7
Try it?
But updating is probably worthwhile anyway.
But updating is probably worthwhile anyway.
Please Log in or Create an account to join the conversation.
Time to create page: 0.062 seconds