Trouble getting mb2hal working with Mollom G75-2T-4G-B VFD

Aciera
Offline
Administrator

3 years 4 months ago #274029 by Aciera

Replied by Aciera on topic Trouble getting mb2hal working with Mollom G75-2T-4G-B VFD

Only thing I can come up with is the com settings as you this in the mb2hal.ini:

Code:

[TRANSACTION_00]
LINK_TYPE=serial
SERIAL_PORT=/dev/ttyUSB0
SERIAL_BAUD=9600

#Data bits. One of 5,6,7,8.
SERIAL_BITS=8

#Data parity. One of: even, odd, none.
SERIAL_PARITY=none

#Stop bits. One of 1, 2.
SERIAL_STOP=2

#Serial port delay between for this transaction only.
#In ms. Defaults to 0.
SERIAL_DELAY_MS=150

MB_SLAVE_ID=1

So maybe you changed Parameter Fd-02 to option '0'

If you have not then the factory setting (Option '1') would be:

Code:

[TRANSACTION_00]
LINK_TYPE=serial
SERIAL_PORT=/dev/ttyUSB0
SERIAL_BAUD=9600

#Data bits. One of 5,6,7,8.
SERIAL_BITS=8

#Data parity. One of: even, odd, none.
SERIAL_PARITY=even

#Stop bits. One of 1, 2.
SERIAL_STOP=1

#Serial port delay between for this transaction only.
#In ms. Defaults to 0.
SERIAL_DELAY_MS=150

MB_SLAVE_ID=1

The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

echristley
Offline
Premium Member

2 years 8 months ago #292250 by echristley

Replied by echristley on topic Trouble getting mb2hal working with Mollom G75-2T-4G-B VFD

@dmradford, did you ever get this working?
I have it running now. I posted the working example to this forum.

Please Log in or Create an account to join the conversation.

Time to create page: 0.208 seconds