How to change jog speed using joystick buttons (QtDragon + HAL)?

Start
Prev
1
Next
End

csurimilan
Away
Junior Member

30 Apr 2025 11:06 #327335 by csurimilan

How to change jog speed using joystick buttons (QtDragon + HAL)? was created by csurimilan

Hi everyone,I'm using QtDragon and a joystick (via

hal_input

) to jog my machine. Jogging works fine with a costant speed, but I’d like to adjust the jog speed using two buttons — one to increase and one to decrease the speed. (like the slider in the Qtdragon gui)

Please Log in or Create an account to join the conversation.

langdons
Offline
Elite Member

30 Apr 2025 13:40 #327340 by langdons

Replied by langdons on topic How to change jog speed using joystick buttons (QtDragon + HAL)?

A speed dial or throttle stick would be cooler.

Please Log in or Create an account to join the conversation.

cmorley
Away
Moderator

30 Apr 2025 14:27 #327348 by cmorley

Replied by cmorley on topic How to change jog speed using joystick buttons (QtDragon + HAL)?

What version of linuxcnc?

Please Log in or Create an account to join the conversation.

langdons
Offline
Elite Member

30 Apr 2025 14:52 #327353 by langdons

Replied by langdons on topic How to change jog speed using joystick buttons (QtDragon + HAL)?

How do the buttons communicate with the PC?

Please Log in or Create an account to join the conversation.

csurimilan
Away
Junior Member

30 Apr 2025 19:57 - 30 Apr 2025 19:57 #327380 by csurimilan

Replied by csurimilan on topic How to change jog speed using joystick buttons (QtDragon + HAL)?

version 2.9

Last edit: 30 Apr 2025 19:57 by csurimilan.

Please Log in or Create an account to join the conversation.

csurimilan
Away
Junior Member

30 Apr 2025 19:59 #327381 by csurimilan

Replied by csurimilan on topic How to change jog speed using joystick buttons (QtDragon + HAL)?

im using a wireless xbox controller for PC. It is working fine

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.085 seconds