DB25-1205 Home stops
- bobhare
- Offline
- Junior Member
-
Less
More
- Posts: 22
- Thank you received: 0
13 Aug 2016 18:17 #78722
by bobhare
DB25-1205 Home stops was created by bobhare
I am currently building a 3 axis machine and have just got round to worrying about the software bits. I have a 3D printer and this initially homes itself and then moves off to print when all is ready.
Is this useful on a 3 axis CNC machine and if so can i control this through the DB25-1205?
Obviously i need the DB25 to PC to respond to the limit switches in case of a fault.
Is this useful on a 3 axis CNC machine and if so can i control this through the DB25-1205?
Obviously i need the DB25 to PC to respond to the limit switches in case of a fault.
Please Log in or Create an account to join the conversation.
- andypugh
-
- Offline
- Moderator
-
Less
More
- Posts: 23558
- Thank you received: 4858
15 Aug 2016 11:52 #78793
by andypugh
Replied by andypugh on topic DB25-1205 Home stops
Homing is very nearly mandatory for a CNC machine.
The following user(s) said Thank You: bobhare
Please Log in or Create an account to join the conversation.
- bobhare
- Offline
- Junior Member
-
Less
More
- Posts: 22
- Thank you received: 0
26 Aug 2016 09:12 #79463
by bobhare
Replied by bobhare on topic DB25-1205 Home stops
I've climbed a few more steps since i posted and am somewhat more aware of what is necessary. Thanks.
Please Log in or Create an account to join the conversation.
Moderators: PCW, jmelson
Time to create page: 0.053 seconds