7i92 7i92M 7i92H

Sorry if this has been addressed before, I searched the forum and couldn't see an answer.

What are the differences between the 3 boards.

I'm going to migrate from my BBB & MK to a x86 Platform & Linuxcnc (support is much better via the forum) and really would like to know which board to get...I have a habit of, if I just jump in, getting the wrong thing for what I need.

Cheers
Rob

Just a stab in the dark here but I think it refers to the header configuration. Standard = female DB25, H = headers only, M = male DB25.

I've got a surplus unopened 7i76e here in Brissy if it is of interest Rob.

Yes, the only difference between the versions is the primary I/O connector.

This is not terribly important if you are going to use a cable to connect the 7I92(X) to a breakout board/drive,
but if you want to use a direct connection to a Mesa breakout (Which have female DB25s) the 7I92M is needed
and for some common low cost parallel port breakout boards (which have male DB25s), the original 7I92
(with a female DB25) is needed.

Cheers guys thanks for the replies, very much appreciated.

Hi Rod.

I would be interested in your 7i76e if it is available. Im in Vic.

Cheers

Matt

Hi guys, I replied to emails from both of you but have not received a reply from either of you. I'm away until the weekend now.

Just checked emails, nothing arrived yet.

No emails came through.

All yours snoozer if you can get in contact with Rod.

I just ordered a 7i92H as I can use the boards I made for my Beaglebone Black.

Sorry guys, I'm tied up with a conference until Saturday morning.. Strange, maybe its caught in a spam trap somewhere. You can get in contact with me here
www.vehiclemods.net.au/contact-us

I guarantee my ecommerce contact us page will get to me because every customer is a VIP!