Mesa 7i96 5v power input

I have received my Mesa 7i96. I am rebuilding my first cnc router from scratch. Migrating from Arduino Uno GRBL and mostly the rewiring is obvious.
The manual indicates a 5v and gnd input on T3 and also two 5v and gnd inputs on TB3 pin 20-23. Do I need to supply multiple 5v inputs? Do they supply different functionalities on the board or are they actually the same connection? If I supply T3 then can I use the TB3 connections for outputs like for power to limit switches circuits?
Eddie

The 5V connections are all common so yes, you can use the TB3 pins as
5V outputs if its convenient

Is the 7i96 schematic drawing available or is that proprietary?

I don't have a pdf-ized schematic for the 7I96 but I can make one
There's nothing proprietary,

If you have a specific question I can answer it.

Nothing specific at the current time. If it's not too much trouble, I would be interested in having a schematic in PDF or even Eagle. Thanks.

Not used a 7i96, yet, but soon....
Does this help:
www.google.com/search?source=hp&ei=A97KX...aCDVgQ4dUDCAY&uact=5