another way to interface panel then 7i73

More
15 Jun 2022 10:54 #245180 by yrsiddhapura
Greetings all, Due to unavailability of 7i73 i would like to know there is any other way to interface Control panel IO with linuxcnc

Please Log in or Create an account to join the conversation.

More
15 Jun 2022 12:15 #245187 by tommylight
7i84 can also be used, but does not support LCD screen.
It does have 2 MPG inputs, 4 analog inputs at VField (8-32V) i think, but you should check that, over a year since i used those, although i have 2 of them and a 7i73.
The following user(s) said Thank You: yrsiddhapura

Please Log in or Create an account to join the conversation.

More
15 Jun 2022 20:13 #245220 by andypugh
There are a number of projects out there that use an Arduino as a panel interface.

Please Log in or Create an account to join the conversation.

More
15 Jun 2022 20:27 #245222 by PCW
We should have more 7I73s in a week or so

Please Log in or Create an account to join the conversation.

More
16 Jun 2022 10:26 #245251 by yrsiddhapura
Yes i was also thinking about to 7I84D with matrix_kb or STM32 black pill but i have no idea about how to make it work with SSerial.

Please Log in or Create an account to join the conversation.

More
16 Jun 2022 10:28 - 16 Jun 2022 10:33 #245252 by yrsiddhapura
Sounds good i think i could wait for week and could you confirm 7I69 and 7I84(not D) ?
Last edit: 16 Jun 2022 10:33 by yrsiddhapura.

Please Log in or Create an account to join the conversation.

More
16 Jun 2022 14:07 #245268 by PCW
No 7I69s (though these can be replaced with a a7I90HD)
We have some 7I84s
The following user(s) said Thank You: yrsiddhapura

Please Log in or Create an account to join the conversation.

More
30 Jun 2022 10:01 #246263 by yrsiddhapura
@PCW i am planing to purchase one of this combination but 7I80HD-25 and 6I24-25 are not available so is any possibility i could purchase this week or next ? coz 5I24-25 is on last in priority

Combination 1
2 X 7I80HD-25
2 X 7I52S
2 X 7I52
2 X 7I84D(X3)
Combination 2
2 X 6I24-25
2 X 7I52S
2 X 7I52
2 X 7I84D(X3)
Combination 3
2 X 5I24-25
2 X 7I52S
2 X 7I52
2 X 7I84D(X3)

 

Please Log in or Create an account to join the conversation.

More
30 Jun 2022 13:56 #246274 by PCW
The 5I24-25 is the only 50 pin FPGA card we have currently
(other than PC104-PCI cards) It will be at least a few months
before we have replacements as they require re-design around
available FPGAs
The following user(s) said Thank You: yrsiddhapura

Please Log in or Create an account to join the conversation.

More
30 Jun 2022 14:14 #246276 by yrsiddhapura
Well mesaus hase 2 7I80HD-25 could you get from them and sell us ?
mesaus.com/product/7i80hd-25/

Please Log in or Create an account to join the conversation.

Moderators: PCWjmelson
Time to create page: 0.084 seconds
Powered by Kunena Forum