Forum Menu

Linumeric-LPT V3 - Ethernet to LPT controller for LinuxCNC

More
2 years 9 months ago - 2 years 9 months ago #291266 by cakeslob
Replied by cakeslob on topic Linumeric-LPT V3 - Ethernet to LPT controller for LinuxCNC
ok, i made to test the remora boards , stepper motors, encoders, spindle encoder and pwm, etc 
It uses thk KR15 linear stages, because it was easy

 
 
 

 
Last edit: 2 years 9 months ago by cakeslob.
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

  • drzasiek90
  • Topic Author
  • New Member
  • New Member
More
2 years 9 months ago #291272 by drzasiek90
Replied by drzasiek90 on topic Linumeric-LPT V3 - Ethernet to LPT controller for LinuxCNC
It looks quite good. It's certainly stiffer than mine, but also larger, heavier, and more expensive :) Have you actually rolled something on it, or is it just for testing movements?

Please Log in or Create an account to join the conversation.

More
2 years 9 months ago #291569 by cakeslob
Replied by cakeslob on topic Linumeric-LPT V3 - Ethernet to LPT controller for LinuxCNC
yeah, the more i built it, the heavier and bigger it got, and in the end its bigger than i want. Havent yet, i need to make/install the waycovers and toolpost, so only used to test encoder/pwm/io/closedloop steppers

Please Log in or Create an account to join the conversation.

  • drzasiek90
  • Topic Author
  • New Member
  • New Member
More
1 year 11 months ago #314183 by drzasiek90
Replied by drzasiek90 on topic Linumeric-LPT V3 - Ethernet to LPT controller for LinuxCNC
If anyone is interested, a new version of the device has been released.
[img

More information is available on my website:
machmaker.pl/linumeric-lpt-v3.2

Please Log in or Create an account to join the conversation.

Moderators: PCW, jmelson
Time to create page: 0.590 seconds
Powered by Kunena Forum