What hardware do I need, exactly

I am noob in this field, just curious question,

can we use standard servo motors with Linux CNC? Like servo motors from Yashkawa, Siemens, Bosch Rexroth, etc? If yes then does anyone have ready made controller with list of required hardware to run 3, 4, 5 axis machines using such servo motors including linear motors in guide ways?

Yes, but for traditional analog controlled servos you will need an encoder counter and dac such as a Mesa 7i77

intel i3-10320 chipsett=13pxmsi H410m-Apro motherboradhp 8gb ram 7EH64AA 3000Mhz.

sata 320 gb hard disk.
we have a problem in a new computer we can not install linux 2.8.2 new version or old version .
is there any one to know how can we install .so we load program linuxcnc 2.8.2 on usb it does not boot it.we need help.from turkey/izmir.

orhan 

 

I am not up to date with the installation issues with new releases and new pc hardware. But I did read something about removing and reinserting the USB drive to work around some bug. Try searching the internet for installation issues pertaining to the specific Linux distro you are using and your specific hardware.

so thank you for yours speed answer.but 2 cumputer guys says we cant it .same computer with new m2 ssd cards already install windows 10.

Use win32diskimager to write the image/iso to USB.
On the PC, enter the BIOS and set it to boot from USB, disable UEFI and secure boot.