Sieg KX1

More
08 Jul 2022 05:22 #246853 by rider-83
Sieg KX1 was created by rider-83
I've recently bought a Sieg KX1. The previous owner appears to have be messing around with the PCB,s etc and the wiring is a mess.
Does any one know if a wiring schematic is available for this machine. I'm especially interested in the wiring of the C11G pcb regarding the I/O connections.  

Please Log in or Create an account to join the conversation.

More
08 Jul 2022 19:18 #246899 by tommylight
Replied by tommylight on topic Sieg KX1
Get us some pictures, maybe we can figure out what goes where from them.

Please Log in or Create an account to join the conversation.

More
13 Jul 2022 23:00 #247263 by andypugh
Replied by andypugh on topic Sieg KX1
The C11G is a commmercial part, the manual can be downloaded here:
www.cnc4pc.com/c11g-multifunction-cnc-board.html

Please Log in or Create an account to join the conversation.

More
14 Jul 2022 05:15 #247275 by rider-83
Replied by rider-83 on topic Sieg KX1
I have the C11G user manual. What I don't know, and would be usefull is the manufacturers wiring diagram indicating what wires are what, and where they fit on the C11G. I can work it out given time, but it would be far more conveniant to have a diagram. But it's not essential. The previous owner had mixed up the limit switch wires, and I've now rectified that issue, but what else has he done I don't yet know until I trace them all back :(

Please Log in or Create an account to join the conversation.

More
16 Jul 2022 19:33 #247495 by andypugh
Replied by andypugh on topic Sieg KX1
I found the manual at LMS, but they wanted $50 for it.
No luck with a free online one.

But, it might be worth asking them if they have a wiring diagram.

Please Log in or Create an account to join the conversation.

More
18 Jul 2022 05:29 #247637 by rider-83
Replied by rider-83 on topic Sieg KX1
Andy,
I have the complete user manual that comes with the machine. I has all sorts of information, including itemised parts lists etc, but no detailed wiring schematic unfortantly. I will be powering up the machine soon, so hopefully from what I've worked out we should be somewhere near.

Please Log in or Create an account to join the conversation.

Moderators: cncbasher
Time to create page: 0.071 seconds
Powered by Kunena Forum