Leadwell VMC760 with Meldas 520amr retrofit posability?

there's not much to choose from:
YMDS2P PCI card will handle MDS drives. it also has 12 inputs and 8 outputs, but usually those are left unused and all I/O is wired to a number of remote I/O modules YI16/YO16P.
unfortunately currently i'm out of stock with i/o, but hope to have new 32-point modules instead in the near future...
I/O modules connect to the main card via YEX3 daughterboard with isolated RS-485.

that sounds good do you know how many i/o modules i might be needing ? sorry for the daft Q's
and when you will likely have the 32-point ones in ?, will you or can you ship to NZ ?

on the photo i see 2 x QX531(?) I/O cards. each provides 64 ins and 48 outs. but on the next photo there're about 60 inputs and 23 relays. not sure where the rest is going, probably to the operator panel keys/lights?
we're working on a similar machine (ARGO A-1) and haven't yet used 32ins/16outs... confused with the TDC 450 from the nearby thread
can't promise when i get the i/o available, sorry. a few weeks at least.

hehe, just got an email from the hosting provider:

11:50 22nd May 2023 Despite the best efforts the engineer on site was unable to recover the array, the card has been replaced and we will proceed to provide new virtual servers for customers ...  to self-restore from their backups.

luckily i have a backup, but it may take a while i guess...

thanks for the reply and info i will have a look at machine next time im in shop, but from memory there are 23 relays.

"11:50 22nd May 2023 Despite the best efforts the engineer on site was unable to recover the array, the card has been replaced and we will proceed to provide new virtual servers for customers ... to self-restore from their backups.

luckily i have a backup, but it may take a while i guess..."

sorry to here your provider has not managed to fix the fault leaving you with clean up duty that is never a good use of time but necessary all the same.

is there a price list anywhere for the IO cards, cables, and YMDSP2 card?

dm17ry wrote:

on the photo i see 2 x QX531(?) I/O cards. each provides 64 ins and 48 outs. but on the next photo there're about 60 inputs and 23 relays. not sure where the rest is going, probably to the operator panel keys/lights?

 

Correct 2 x QX351 boards the other 2 boards are QX522 and QX611-1
there are 80TB conectors/in/out of which 25 not in use( either in or out not connected)