Retrofit CNC FROM FANUC O-M OT MESA
- dja
- Offline
- New Member
-
Less
More
- Posts: 2
- Thank you received: 0
21 May 2026 17:06 #346540
by dja
Retrofit CNC FROM FANUC O-M OT MESA was created by dja
Hello everyone, I have an old CNC milling machine with an onboard FANUC O-M. The IO board and the MEM board are dead. I wanted to switch to LinuxCNC and MESA but I don't know which board to choose because I would like to keep my Fanuc servomotors: the three A06B-0141-B077 / αC12/2000 / 1.0 kW / 2.5 A, the SVM3 and my FANUC A06B-0855-B102 spindle motor (~7.5 kW).
Please Log in or Create an account to join the conversation.
- tommylight
-
- Offline
- Moderator
-
Less
More
- Posts: 21620
- Thank you received: 7383
21 May 2026 19:35 #346541
by tommylight
Replied by tommylight on topic Retrofit CNC FROM FANUC O-M OT MESA
No idea about the motors as they tend to have several types of feedback, but for a general idea of retrofitting such machines have a look here:
forum.linuxcnc.org/30-cnc-machines/33529-hurco-bmc-20p-retrofit
forum.linuxcnc.org/30-cnc-machines/31792...-01-retrofit?start=0
There are many more, lathe and a lot of plasma machines i have retrofitted, but this is more like yours, hopefully.
forum.linuxcnc.org/30-cnc-machines/33529-hurco-bmc-20p-retrofit
forum.linuxcnc.org/30-cnc-machines/31792...-01-retrofit?start=0
There are many more, lathe and a lot of plasma machines i have retrofitted, but this is more like yours, hopefully.
Please Log in or Create an account to join the conversation.
- dja
- Offline
- New Member
-
Less
More
- Posts: 2
- Thank you received: 0
25 May 2026 11:57 #346604
by dja
Replied by dja on topic Retrofit CNC FROM FANUC O-M OT MESA
The Fanuc A06B-6102-H211#H520 spindle module, the A06B-0855-B102 SVM3 A06B-6080-H304 spindle motor, and the A06B-0141-B077 1.0 kW 2.5A X, Y, and Z axis motor, model alphaC12/2000. Thank you.
Please Log in or Create an account to join the conversation.
Time to create page: 0.077 seconds