outher file formats
27 Nov 2011 23:12 #15147
by ezboy
outher file formats was created by ezboy
is there a way to get emc2 too see a .plt file,
or aney outher file than a .ngc?
or aney outher file than a .ngc?
Please Log in or Create an account to join the conversation.
27 Nov 2011 23:49 #15149
by BigJohnT
Replied by BigJohnT on topic Re:outher file formats
If it contains EMC2 compatible g-code you can just add the extension to the [DISPLAY] section of the ini file as shown in the Integrators Manual.
John
John
Please Log in or Create an account to join the conversation.
28 Nov 2011 21:56 #15172
by ezboy
Replied by ezboy on topic Re:outher file formats
can you give me a little more help?
i ran a search for ini in the manual with no luck.
please tel me what im doing wronge.
i know nothing about linux.
i ran a search for ini in the manual with no luck.
please tel me what im doing wronge.
i know nothing about linux.
Please Log in or Create an account to join the conversation.
28 Nov 2011 22:05 #15173
by BigJohnT
Replied by BigJohnT on topic Re:outher file formats
First does the file contain EMC compatible g-code? Just rename one to .ngc and see if it will open in EMC.
The ini info is in the Integrators Manual.
John
The ini info is in the Integrators Manual.
John
Please Log in or Create an account to join the conversation.
28 Nov 2011 22:16 #15174
by ezboy
Replied by ezboy on topic Re:outher file formats
where can i find{ Integrators Manual}?
Please Log in or Create an account to join the conversation.
28 Nov 2011 23:29 #15176
by andypugh
Replied by andypugh on topic Re:outher file formats
ezboy wrote:
It's not a Linux thing.
You probably need the info here (it is in the manual too)
www.linuxcnc.org/docview/html/config_ini_config.html
i ran a search for ini in the manual with no luck.
...
i know nothing about linux.
It's not a Linux thing.
You probably need the info here (it is in the manual too)
www.linuxcnc.org/docview/html/config_ini_config.html
Please Log in or Create an account to join the conversation.
29 Nov 2011 11:55 #15187
by Rick G
Replied by Rick G on topic Re:outher file formats
I believe .plt files are normally files prepared to send to a plotter, based on HPGL file format.
So a CAD program gives you the option to save in that format so it can be sent directly to a plotter.
As such they do not contain the g codes EMC would be looking for.
Can you save them in another format?
Rick G
So a CAD program gives you the option to save in that format so it can be sent directly to a plotter.
As such they do not contain the g codes EMC would be looking for.
Can you save them in another format?
Rick G
Please Log in or Create an account to join the conversation.
29 Nov 2011 12:07 #15188
by Rick G
Replied by Rick G on topic Re:outher file formats
You may also look at Chapter 22 of the User Manual for Image to G code for .png .gif .jpg files.
You can find the manual at...
Applications
CNC
EMC2 User manual
Rick G
You can find the manual at...
Applications
CNC
EMC2 User manual
Rick G
Please Log in or Create an account to join the conversation.
29 Nov 2011 20:38 #15196
by ezboy
Replied by ezboy on topic Re:outher file formats
i can export as
ai
eps
wmf
dxf
bmp
if i export as a dxf the emage is app.
100 times too big.
ai
eps
wmf
dxf
bmp
if i export as a dxf the emage is app.
100 times too big.
Please Log in or Create an account to join the conversation.
29 Nov 2011 21:31 #15199
by Rick G
Replied by Rick G on topic Re:outher file formats
If you export as dxf you will need a program to convert it to a g code that emc understands.
Take a look here...
wiki.linuxcnc.org/emcinfo.pl?Cam
Rick G
Take a look here...
wiki.linuxcnc.org/emcinfo.pl?Cam
Rick G
Please Log in or Create an account to join the conversation.
Moderators: Skullworks
Time to create page: 0.074 seconds