TB6600 stepper driver; step settings question
07 Dec 2021 15:09 #228537
by norkamus
TB6600 stepper driver; step settings question was created by norkamus
Hello. I am new here and new to making my own machine. I can't seem to find an explanation of the first 3 step settings on my TB6600 drivers. Settings "NC", "2/A" , "2/B". I am guessing the first one is "Off" or "No Current" because my motor wouldn't work on this setting. Can someone clarify these 3 settings?
Nick
Nick
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 17828
- Thank you received: 5928
07 Dec 2021 16:25 #228539
by tommylight
Replied by tommylight on topic TB6600 stepper driver; step settings question
www.haoyuelectronics.com/ebay/TB6600/TB6600HQ_datasheet.pdf
Page 19 and 20
Page 19 and 20
The following user(s) said Thank You: norkamus
Please Log in or Create an account to join the conversation.
07 Dec 2021 16:55 #228549
by norkamus
Replied by norkamus on topic TB6600 stepper driver; step settings question
Apologies if I posted this in the wrong area. I haven't been on a forum in 20 years. My manners probably need some polishing up.
Nick
Nick
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 17828
- Thank you received: 5928
07 Dec 2021 17:01 #228551
by tommylight
Replied by tommylight on topic TB6600 stepper driver; step settings question
No worries, we can move it.
Please Log in or Create an account to join the conversation.
Time to create page: 0.110 seconds