- Configuring LinuxCNC
- Configuration Tools
- PnCConf Wizard
- RPI4 with 7i96 - eSTOP not working on keyboard or axis GUI
RPI4 with 7i96 - eSTOP not working on keyboard or axis GUI
10 Jan 2021 14:00 - 10 Jan 2021 14:02 #194729
by Markyd
RPI4 with 7i96 - eSTOP not working on keyboard or axis GUI was created by Markyd
I've just received my 7i96 and 7i85 mesa boards. I've changed the PI's IP address and I can ping the 7i96. I've run PnCConf and created basis setup just to see if i can get it working. It loads up ok and seems to have connected. However, if I press F1 on the keyboard nothing happens. it will not come out of eSTOP. Ive also tried pressing the button on the axis gui, no joy. I had initially linked the estop to in input on the board that I hadn't wired to anything, so I've now edited that out of the hal and restarted linuxcnc. Still no luck.
Does anyone know what i have done wrong?
Does anyone know what i have done wrong?
Last edit: 10 Jan 2021 14:02 by Markyd.
Please Log in or Create an account to join the conversation.
10 Jan 2021 16:24 #194741
by cmorley
Replied by cmorley on topic RPI4 with 7i96 - eSTOP not working on keyboard or axis GUI
Can't really help without seeing your config files.
Please Log in or Create an account to join the conversation.
14 Jan 2021 09:08 #195297
by Markyd
Replied by Markyd on topic RPI4 with 7i96 - eSTOP not working on keyboard or axis GUI
It seems that setting up hardware buttons inpnCconf disables the gui /keyboard buttons. I started again from scratch and left out the hardware buttons and the keyboard now works again.
Please Log in or Create an account to join the conversation.
Moderators: cmorley
- Configuring LinuxCNC
- Configuration Tools
- PnCConf Wizard
- RPI4 with 7i96 - eSTOP not working on keyboard or axis GUI
Time to create page: 0.069 seconds