Mirror

Hallo.
I'm looking for some solution to have mirror or symetric program?
Is it possible in linuxcnc ?
Regards Grzesiek.

Hi

I'm looking for some solution to have mirror or symetric program?

I suspect you are looking for something like G51.1 in Fanuc
I had this on a Fanuc control and also a Denford one under a different number.
Can't say as I used it much though (once that I can think of)

It is not implemented in Linuxcnc, I think Andy's link is probably your best bet if you just want to make a mirrored part from the same code

regards

Hallo,
Thank you for your answers.

Grecode and second config I think is the best way .
Rotate I was trying ,but it not working how I want .
CNC biesse 346 atc orginaly have Control RT480 CNI ,from two weeks LINUXCNC and I'm realy happy now but?
Symetric program is very important for me ,becouse many of my cabinet parts have to be left side and right .
Old control has something like this
Grecode ,as it;s paid?
How working second config ,Is there any example?

Regards.

Servo motors Yaskawa.
I just download grecode,.I will check it .
Exit and restart controller it's not posible.
Regards.

Many thanks four your help .
Grecode is really good soft ,but needt terminal.
Now I'm thinking about filter and inside grecode.
This is very old topic and I decide to close it.
Many thanks again

I I know that you were closing this topic, but here is another possible way to skin this cat. Change the sign of one of your axis in the g-code (X or Y) then use a coordinate system shift (G55 or what ever) to move the origin the appropriate amount to shift things back onto the table. That should have the effect of mirroring the code about what ever axis is negated.

Hi,
I need symetry like FLIP-FLOP and changing in INI are reading only ones when LINUXCNC starting.
Now I try set FILTER changing sign,orgin,....but don't know programming language BASH.
This is my new subject :
www.linuxcnc.org/index.php/french/forum/...ns/28556-script-bash
Thanks for help.
Regards.