Bay Area consultant familiar with ProBotix/LinuxCNC
- agrimani
- Offline
- New Member
-
Less
More
- Posts: 2
- Thank you received: 0
29 Mar 2026 00:56 - 29 Mar 2026 06:05 #344895
by agrimani
Bay Area consultant familiar with ProBotix/LinuxCNC was created by agrimani
Am looking for some help to get a simple ProBotix-based small-format router up and running. Our office is in Novato, CA, 30 minutes north of San Francisco.
Please post any offers here, and we take the conversation off line.
Thanks!
Please post any offers here, and we take the conversation off line.
Thanks!
Last edit: 29 Mar 2026 06:05 by agrimani. Reason: clarifying the region
Please Log in or Create an account to join the conversation.
- andypugh
-
- Offline
- Moderator
-
Less
More
- Posts: 19847
- Thank you received: 4630
30 Mar 2026 12:13 #344946
by andypugh
Replied by andypugh on topic Bay Area consultant familiar with ProBotix/LinuxCNC
I don't think they do consultancy, but you are very close to the Mesa Electronics HQ.
Please Log in or Create an account to join the conversation.
- PCW
-
- Offline
- Moderator
-
Less
More
- Posts: 17843
- Thank you received: 5221
30 Mar 2026 22:44 #344975
by PCW
Replied by PCW on topic Bay Area consultant familiar with ProBotix/LinuxCNC
Just asking specific questions on the forum may be enough to get you going.
Please Log in or Create an account to join the conversation.
- agrimani
- Offline
- New Member
-
Less
More
- Posts: 2
- Thank you received: 0
15 Apr 2026 19:18 #345576
by agrimani
Replied by agrimani on topic Bay Area consultant familiar with ProBotix/LinuxCNC
Thanks; am really looking for someone I can pay to configure this system, then help with programing of the router to make a number of parts.
Please Log in or Create an account to join the conversation.
Time to create page: 0.067 seconds