(superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation

Beagle ???????
I tested your iso, it works properly, from writing the image to usb to install process and reboot, everything is OK.
Thank you.
Whats with all the lines ????

I took the link down, I got so frustrated with people not following the instructions I gave.
I'm trying "Anger Management"

I'm going to try adding the files needed for running qtvcp examples and then sort out what is missing for the designer files.
I've done some initial testing but really need to work out what is and what isn't needed from the QyPyVCP file deps for qtvcp.
Depending on how big the iso ends up I may remove libre office to keep the size down.
I'll update the progess on the users mailing list.

Once again thanks for your help, feedback is great.

I wouldn't mind giving your ISO a try on a VmWare vm.

All I needed to add to Devuan ISO for running QtVCP sims were:
python-pyqt5 python-pyqt5.qsci python.pyqt5.qtopengl python-pyqt5.qtsvg python-opengl python-opencv espeak python-dbus.mainloop.pyqt

I couldnt apply espeak-ng-espeak and wasn't to concerned

And for running Designer I just followed github.com/LinuxCNC/linuxcnc/tree/master...ython/qtvcp/designer

iso
drive.google.com/file/d/1rL_YJZqJ8sIbucN...KeN/view?usp=sharing
md5
drive.google.com/file/d/1rx9VWub9qvvXxrm...XA9/view?usp=sharing

The image has to be written as a raw image to a usb stick. Either dd in linux or win32diskimager under windows.

Thanks Rob, I'll give it a shot tomorrow.

My ISO ended up at 3.2 Gb with all the LinuxCNC and QtVCP stuff.

I've had a few issues setting up designer, I had to install the deps from qtpyvcp, now I just need to work out which ones are really needed.