Debian Wheezy 2.7 to 2.9?

Is it possible to go from Debian Wheezy 2.7.14 to 2.9 or do I have to use a different Debian version.

buildbot.linuxcnc.org/~buildmaster/dists/wheezy/master-rt/
Not sure if it was 32 or 64 bit, so check and chose from there, usually the latest build is at or near the bottom of the page.
Download, doubleclick, install, that should be it.
If there is no gdebi installed, that might be a problem as the repositories for Wheezy are no longer working, so search how to install a deb package.

hi
the main info on updating is here
buildbot.linuxcnc.org/

consider using uspace for the QTvcp Dragon guis
gnipsel.com/linuxcnc/index.html

bbsr_5a wrote: hi
the main info on updating is here
buildbot.linuxcnc.org/

consider using uspace for the QTvcp Dragon guis
gnipsel.com/linuxcnc/index.html

Qtvcp and Dragon are on the LinuxCNC website.

linuxcnc.org/docs/devel/html/gui/qtvcp.html
linuxcnc.org/docs/devel/html/gui/qtdragon.html

Hey guys I'm pretty new to Linux, I've been fumbling my way through it so far but can you please tell me what this is for.
consider using uspace for the QTvcp Dragon guis

Thanks Mike

TBH I don't know what his intention was, I was just pointing out that the link wasn't to what he suggested.