Raspbery Pi 4 - 4GB or 8GB - which one or both?

More
5 years 1 week ago #224254 by JacquidR
Hi there,

Pease advise for which Raspberry Pi4 the available downloadable image "LinuxCNC 2.8.1  Raspberry Pi OS based on Debian 10 Buster " .

The 4GB or the 8GB? Or both? 

I am asking because there were previously issues with USB etc on the 8GB and now I am not sure if this is resolved with this latest available image. And I want to buy more pies but can't unless I know which RAM to purchase.

Thank you.
Regards, Jacqueline du Rand
 

Please Log in or Create an account to join the conversation.

More
5 years 5 days ago #224494 by andypugh
I admit that I haven't tried running on a Pi for some time, and I created the SD images on the LinuxCNC site.

I would suggest going with the 4GB, mainly as it is cheaper and 4GB is enough for LinuxCNC.

Please Log in or Create an account to join the conversation.

More
5 years 5 days ago #224501 by Aaroncnc
Not to hijack the thread but.
Why no 64 bit image and only 32bit?

Please Log in or Create an account to join the conversation.

More
5 years 5 days ago #224502 by andypugh

Not to hijack the thread but.
Why no 64 bit image and only 32bit?
Simply that at the time I built the images Raspian was 32 bit and the pre-packaged preempt-rt kernel was 32-bit. 
(And, also, the buildbot that makes the debs was 32-bit) 

Please Log in or Create an account to join the conversation.

More
5 years 5 days ago #224525 by Aaroncnc

Not to hijack the thread but.
Why no 64 bit image and only 32bit?
Simply that at the time I built the images Raspian was 32 bit and the pre-packaged preempt-rt kernel was 32-bit. 
(And, also, the buildbot that makes the debs was 32-bit) 
Will there be a 64bit image added?
I know there are a few build hidden in some threads but some users may have a hard time finding the latest one.
I know from my testing the 64bit images have better latency with my setup. 

Please Log in or Create an account to join the conversation.

More
5 years 4 days ago - 5 years 4 days ago #224610 by elovalvo
At this link you can find the 64-bit deb packages for LinuxCNC version 2.8.2 and 2.9.0~pre0

forum.linuxcnc.org/9-installing-linuxcnc...lem?start=120#224608

Not to hijack the thread but.
Why no 64 bit image and only 32bit?
Simply that at the time I built the images Raspian was 32 bit and the pre-packaged preempt-rt kernel was 32-bit. 
(And, also, the buildbot that makes the debs was 32-bit) 

Will there be a 64bit image added?
I know there are a few build hidden in some threads but some users may have a hard time finding the latest one.
I know from my testing the 64bit images have better latency with my setup. 



 
Last edit: 5 years 4 days ago by elovalvo.

Please Log in or Create an account to join the conversation.

Time to create page: 0.060 seconds
Powered by Kunena Forum