Cnclinux do not find harddisk
- erdem
- Offline
- New Member
-
Less
More
- Posts: 4
- Thank you received: 0
03 Jan 2025 20:05 #317956
by erdem
Cnclinux do not find harddisk was created by erdem
Hi guys,
I am new in here.I want to install cnclinux, but linuxcnc 2.9.3 debian does not find my harddisk.
I looked at old ıssue ,ı change from ıde to ACHI , but it does not find harddisk that is ntfs format
What am I making at now ?
I am new in here.I want to install cnclinux, but linuxcnc 2.9.3 debian does not find my harddisk.
I looked at old ıssue ,ı change from ıde to ACHI , but it does not find harddisk that is ntfs format
What am I making at now ?
Please Log in or Create an account to join the conversation.
- tommylight
-
- Online
- Moderator
-
Less
More
- Posts: 19519
- Thank you received: 6548
03 Jan 2025 21:09 #317965
by tommylight
Replied by tommylight on topic Cnclinux do not find harddisk
What is the exact error?
Did you disable "secure boot" in BIOS?
Did you enable CMS in BIOS?
Did you disable "secure boot" in BIOS?
Did you enable CMS in BIOS?
Please Log in or Create an account to join the conversation.
- erdem
- Offline
- New Member
-
Less
More
- Posts: 4
- Thank you received: 0
04 Jan 2025 09:40 #318032
by erdem
Replied by erdem on topic Cnclinux do not find harddisk
hi, I look at my bios that is so old and is not new firmware for update.
MY motherbord is pegatron ıpmıp 55 gen.Anyway, I can setup ubuntu on my pc, Previously, I used ubuntu on my pc.
Has ubuntu cnclinux program?
MY motherbord is pegatron ıpmıp 55 gen.Anyway, I can setup ubuntu on my pc, Previously, I used ubuntu on my pc.
Has ubuntu cnclinux program?
Please Log in or Create an account to join the conversation.
- tommylight
-
- Online
- Moderator
-
Less
More
- Posts: 19519
- Thank you received: 6548
04 Jan 2025 11:05 #318040
by tommylight
Replied by tommylight on topic Cnclinux do not find harddisk
Please Log in or Create an account to join the conversation.
- erdem
- Offline
- New Member
-
Less
More
- Posts: 4
- Thank you received: 0
04 Jan 2025 16:03 #318092
by erdem
Replied by erdem on topic Cnclinux do not find harddisk
Hi , I installed old version debian in 2019. I try to update my linuxcnc , but terminal codes is locked.How am I making unlock?
Please Log in or Create an account to join the conversation.
- tommylight
-
- Online
- Moderator
-
Less
More
- Posts: 19519
- Thank you received: 6548
04 Jan 2025 16:52 #318103
by tommylight
Replied by tommylight on topic Cnclinux do not find harddisk
What is the exact error?
Please Log in or Create an account to join the conversation.
- erdem
- Offline
- New Member
-
Less
More
- Posts: 4
- Thank you received: 0
04 Jan 2025 17:36 #318109
by erdem
Replied by erdem on topic Cnclinux do not find harddisk
thanks for reply to me,
I am using 2.7.15 version of linuxcnc , I want to update from 2.7.15 to 2.9.3,but Debian terminal does not take code like sudo apt install .... or sudo apt update /upgradeI.Debian send to message me thar Terminal is locked to code
gooddays
I am using 2.7.15 version of linuxcnc , I want to update from 2.7.15 to 2.9.3,but Debian terminal does not take code like sudo apt install .... or sudo apt update /upgradeI.Debian send to message me thar Terminal is locked to code
gooddays
Please Log in or Create an account to join the conversation.
- tommylight
-
- Online
- Moderator
-
Less
More
- Posts: 19519
- Thank you received: 6548
04 Jan 2025 19:25 #318115
by tommylight
Replied by tommylight on topic Cnclinux do not find harddisk
2.7.n is probably Debian Wheezy, so it can not be upgraded to 2.9.3 due to changes in Python, mostly.
For Wheezy, you need to use
sudo apt-get update
sudo apt-get upgrade
It might just upgrade to 2.8.n as that was the last Python 2 version of LinuxCNC, although Wheezy has reached it's "end of life" a long time ago so no more updates for it.
-
You can install the new 2.9.3 from the downloads page, and if it tells you it can not find files/usb device, just unplug the USB, wait 5 seconds, plug in the USB, wait 10 seconds, click on continue/next.
Be aware that if using an old PC, it is much better to use the Ubintu version i linked above or the existing Wheezy version as they use RTAI kernel, while the new ones use RT-Preempt kernels and thy will have worse latency on old systems.
For Wheezy, you need to use
sudo apt-get update
sudo apt-get upgrade
It might just upgrade to 2.8.n as that was the last Python 2 version of LinuxCNC, although Wheezy has reached it's "end of life" a long time ago so no more updates for it.
-
You can install the new 2.9.3 from the downloads page, and if it tells you it can not find files/usb device, just unplug the USB, wait 5 seconds, plug in the USB, wait 10 seconds, click on continue/next.
Be aware that if using an old PC, it is much better to use the Ubintu version i linked above or the existing Wheezy version as they use RTAI kernel, while the new ones use RT-Preempt kernels and thy will have worse latency on old systems.
Please Log in or Create an account to join the conversation.
- danilom
- Offline
- Senior Member
-
Less
More
- Posts: 69
- Thank you received: 5
12 Jan 2025 15:28 #318783
by danilom
Replied by danilom on topic Cnclinux do not find harddisk
Recently I had to install linuxcnc on a previously win11 installed hard drive, it was not possible , setup refused to make partitions for new sistem.
Solution was to go into live mode and then from Gparted delete all previous partitions on hard drive, then the install went without problems.
Solution was to go into live mode and then from Gparted delete all previous partitions on hard drive, then the install went without problems.
Please Log in or Create an account to join the conversation.
Time to create page: 0.078 seconds