RPi5 Test images

All images have been tested on a 4gb Rpi5 bought int Nov-Dec 2023, updated with latest EEPROM. Not official images by any length. It is recommended to use Balena Etcher. Rpi Imager has had issues with the images built by the program suite used to build the images.

Saturday 1st Feb 2025
The image below is not recommended for use and is only being left for historical reasons.


Friday 24th Jan 2025
This one has Mate Desktop, latest Linuxcnc Packages built from 2.9 source, ie: has hm2_spix driver. SPI enabled by default, no messing with config file. 6.12.10 rt kernel
drive.google.com/file/d/1EnvDj8BY6zotSFk...E70/view?usp=sharing

The below packages are installed in the image.

Linuxcnc packages available here if anyone is interested.
github.com/ozzyrob/rpi-linuxcnc-packages...62642dde63_arm64.deb
github.com/ozzyrob/rpi-linuxcnc-packages...62642dde63_arm64.deb

Mesaflash 3.5.10
github.com/ozzyrob/rpi-linuxcnc-packages...ash_3.5.10_arm64.deb

I get this error message when trying to burn the image

Wrong image as it seems to be nearly 6GB in size.

Not wrong image. Some people didn't read the opening post completely.

 As stated in the opening post:

All images have been tested on a 4gb Rpi5 bought int Nov-Dec 2023, updated with latest EEPROM. Not official images by any length. It is recommended to use Balena Etcher. Rpi Imager has had issues with the images built by the program suite used to build the images.

That image is depreciated.
Please use the image on the downloads page

www.linuxcnc.org/iso/rpi-5-debian-bookwo...25-01-27-0140.img.xz

Dang it, i did vaguely recall someone or you mentioning this before, but i was not sure.

Alright, gotcha. Btw I tried balena etcher as well but it did not work either. Only reason I wanted to try this image is since I'm not able to install ethercat on the latest one...