Spindle GtkHscale[scl_spindle] error

More
04 Jun 2016 13:16 #75486 by korbendallas78
Dear,
In the gmoccapy, the GtkHscale[scl_spindle] does not change the spindle speed pins (motion.spindle-speed-out,etc.) in negative direction. In positive direction its work perfectly. Pls help!

Please Log in or Create an account to join the conversation.

More
05 Jun 2016 14:56 #75523 by newbynobi
Please post you config. I am pretty sure it is a config error.

Scl_spindle is for spindle override, not for the spindle revs.

Norbert

Please Log in or Create an account to join the conversation.

More
06 Jun 2016 04:23 #75538 by korbendallas78
I' ve tried in many configuration. Same problem. I checkink the motion.spindle-speed-out , motion.spindle-speed-out-abs, motion.spindle-speed-out_rps, motion.spindle-speed-out-rps-abs in the Hal Meter. If the spindle is turn on negativ direction this values doesn't change in the Hal Meter. If the spindle turn the positve direction it changes. Please try it, you will see!

Please Log in or Create an account to join the conversation.

More
06 Jun 2016 04:36 #75539 by korbendallas78
here is a config
Attachments:

Please Log in or Create an account to join the conversation.

More
06 Jun 2016 06:44 #75540 by korbendallas78
I want to control the vfd on modbus, that i need the motion.spindle-speed-out-abs pin.

Please Log in or Create an account to join the conversation.

More
07 Jun 2016 05:07 #75607 by korbendallas78
gmoccapy.spindle-override.direct-value isn't change if move the scale and the spindle direction is ccw

Please Log in or Create an account to join the conversation.

More
07 Jun 2016 20:23 #75657 by newbynobi
It is an IN Pin, so it is correct not to change!!!!

May be i find some time next week to look at this. A short look in your hal file shows, that you have not configured spindle ccw no hal connection to that kind of pin!

Please test with gmoccapy sim and report if that do work.

Norbert

Please Log in or Create an account to join the conversation.

More
13 Jun 2016 05:24 #75897 by korbendallas78
I tested with sim, but it doesn't work. There is strange things if i change the rotation direction.

Please Log in or Create an account to join the conversation.

More
13 Jun 2016 20:13 #75936 by newbynobi
I will test that asap.
Give me a few weeks, as I am busy with a scara , a gantry and a lathe rebuild.

Norbert

Please Log in or Create an account to join the conversation.

More
14 Jun 2016 07:31 - 14 Jun 2016 07:37 #75960 by newbynobi
@korbendallas78,

as I could not sleep, due to the behavior you described, I tested with configs / sim / gmoccapy / gmoccapy.ini

with Linuxcnc 2.7 and gmoccapy 1.5.6.1 and with master and gmoccapy 1.5.6.3


  • get out of estop
  • switch the machine on
  • home all axis
  • goto MDI page and enter S2000 M3
  • goto settings page
  • click on button halshow
  • add to watch tab
  • * motion.spindle-speed-out-rps
    * motion.spindle-speed-out-abs
    * motion.spindle-speed-out
  • go back to manual tab
  • change the slider and you will see values do change
  • stop the spindle pressing the stop button
  • values are zero
  • start spindle in reverse and watch the values
  • change the override slider and you will see the values do change

So no bug or error on my side.

Norbert
Last edit: 14 Jun 2016 07:37 by newbynobi.
The following user(s) said Thank You: korbendallas78

Please Log in or Create an account to join the conversation.

Moderators: newbynobiHansU
Time to create page: 0.151 seconds
Powered by Kunena Forum