Gmoccapy License?
- APaulsen
- Offline
- New Member
-
Less
More
- Posts: 2
- Thank you received: 0
13 Mar 2021 14:26 #202096
by APaulsen
Screen shots of gui designs was created by APaulsen
does anyone know what license Gmoccapy is?
Please Log in or Create an account to join the conversation.
- robertspark
- Offline
- Platinum Member
-
Less
More
- Posts: 915
- Thank you received: 216
13 Mar 2021 14:55 #202099
by robertspark
what do you want to do with it?
Replied by robertspark on topic Screen shots of gui designs
does anyone know what license Gmoccapy is?
what do you want to do with it?
Please Log in or Create an account to join the conversation.
- andypugh
-
- Offline
- Moderator
-
Less
More
- Posts: 23563
- Thank you received: 4859
13 Mar 2021 22:17 #202153
by andypugh
github.com/LinuxCNC/linuxcnc/blob/master...gmoccapy/gmoccapy.py
Says GPL v2
Replied by andypugh on topic Screen shots of gui designs
does anyone know what license Gmoccapy is?
github.com/LinuxCNC/linuxcnc/blob/master...gmoccapy/gmoccapy.py
Says GPL v2
Please Log in or Create an account to join the conversation.
- newbynobi
-
- Offline
- Moderator
-
Less
More
- Posts: 2075
- Thank you received: 406
14 Mar 2021 15:48 #202220
by newbynobi
Replied by newbynobi on topic Screen shots of gui designs
Yes, it is GPL2 so open source, but if you modify code or use some of mine, you will need to public also your code.
(That is only in short therms, for further information you will need to read the GPL2 license code)
Norbert
(That is only in short therms, for further information you will need to read the GPL2 license code)
Norbert
Please Log in or Create an account to join the conversation.
Moderators: newbynobi, HansU
Time to create page: 0.060 seconds