Forum Menu

Edit MDI Jog Scale

More
4 years 10 months ago #230017 by eman5oh
Edit MDI Jog Scale was created by eman5oh
How does one edit the max MDI jog speed? My machine moves at 100 IPM max but the MDI jog interface goes up to 600 IPM. When set to anything above 100, the machine stays at 100 as expected, just wan to tweak the UI to match the machine limits.

Thanks.

Please Log in or Create an account to join the conversation.

More
4 years 10 months ago #230018 by Michael
Replied by Michael on topic Edit MDI Jog Scale
What gui? Share your ini file. Often the values are taken from there for different gui features.

Please Log in or Create an account to join the conversation.

More
4 years 10 months ago - 4 years 10 months ago #230022 by eman5oh
Replied by eman5oh on topic Edit MDI Jog Scale
I have attached the ini file and screenshot of the gui.

 

File Attachment:

File Name: BossSmooth.ini
File Size:5.4 KB


 

 
Last edit: 4 years 10 months ago by eman5oh.

Please Log in or Create an account to join the conversation.

More
4 years 10 months ago #230024 by HansU
Replied by HansU on topic Edit MDI Jog Scale
Can you also post your HAL file(s) and the .pref file?

Please Log in or Create an account to join the conversation.

More
4 years 10 months ago #230037 by eman5oh
Replied by eman5oh on topic Edit MDI Jog Scale
See the attached files, I looked through them but it is not apparent where this setting resides at least to me.    Thanks for the help.

 

File Attachment:

File Name: BossSmooth.pref.txt
File Size:1.85 KB

 

File Attachment:

File Name: BossSmooth.hal.txt
File Size:14.3 KB

 

File Attachment:

File Name: custom.hal.txt
File Size:242 B

 

File Attachment:

File Name: gmoccapy_p...nces.txt
File Size:1.51 KB

Please Log in or Create an account to join the conversation.

More
4 years 10 months ago #230051 by HansU
Replied by HansU on topic Edit MDI Jog Scale
BossSmooth.ini:88

It should be
Code:
MAX_LINEAR_VELOCITY = 1.67
in the TRAJ section. I don't know why you commented the right line out ;-)

 
The following user(s) said Thank You: eman5oh

Please Log in or Create an account to join the conversation.

Moderators: newbynobi, HansU
Time to create page: 0.078 seconds
Powered by Kunena Forum