Deckel FP4A Retrofit

More
1 year 8 months ago #322509 by tommylight
Replied by tommylight on topic Deckel FP4A Retrofit
NEAT ! :)

Please Log in to join the conversation.

More
1 year 8 months ago #322514 by Beovoxo
Replied by Beovoxo on topic Deckel FP4A Retrofit
thx :) there will be a DB37 breakout board in the box and 10 overrule switches on front side :)

Please Log in to join the conversation.

More
1 year 8 months ago #322535 by Beovoxo
Replied by Beovoxo on topic Deckel FP4A Retrofit
force over switches installed and ready for wiring signal wires to the DB37 connector :)
 

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Please Log in to join the conversation.

More
1 year 7 months ago #325259 by Beovoxo
Replied by Beovoxo on topic Deckel FP4A Retrofit
Got the screen mounted today in a old electrical cabinet. I gave it some paint but it will be repainted later. All bottoms are arrive in the next few days. All push bottoms will be square, and a keyboard with touchpad will be on a shelf, on the lower part of the cabinet. 

 

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Please Log in to join the conversation.

More
1 year 7 months ago #325261 by Beovoxo
Replied by Beovoxo on topic Deckel FP4A Retrofit
Got the mill down from the trailer and moved it inside :)
 

Attachment not found

Attachment not found

Attachment not found

Please Log in to join the conversation.

More
1 year 7 months ago #325262 by Beovoxo
Replied by Beovoxo on topic Deckel FP4A Retrofit
Test setup for the spindle motor start "Delta, YY" starter, and i painted the motor fan duct. 

Please Log in to join the conversation.

More
1 year 7 months ago #325264 by Beovoxo
Replied by Beovoxo on topic Deckel FP4A Retrofit
I got the coolant tank cleaned up and mounted the pump again, the old owner did alot of plastic milling so the plastic had clogged up the pump.
 

Attachment not found

Attachment not found

Please Log in to join the conversation.

More
1 year 7 months ago #325275 by Beovoxo
Replied by Beovoxo on topic Deckel FP4A Retrofit
Marking up where the parts will be placed.
 

Attachment not found

Attachment not found

Please Log in to join the conversation.

More
1 year 7 months ago #325279 by tommylight
Replied by tommylight on topic Deckel FP4A Retrofit
Looking good! :)

Please Log in to join the conversation.

More
1 year 7 months ago #325353 by Beovoxo
Replied by Beovoxo on topic Deckel FP4A Retrofit

Attachment not found



Got the power to the screen and pc wired:) 

Please Log in to join the conversation.

Time to create page: 0.079 seconds
Powered by Kunena Forum